20November2018

Nano-Micro Letters

Improved Electrochemical Performance Based on Nanostructured SnS2@CoS2-rGO Composite Anode for Sodium-Ion Batteries

View ResearcherID and ORCID

Xia Wang1,*, Xueying Li1, Qiang Li1, Hongsen Li1, Jie Xu1, Hong Wang1, Guoxia Zhao1, Lisha Lu1, Xiaoyu Lin1, Hongliang Li2, Shandong Li1,*

Abstract | Support Info
icon-htmlFull Text Html
icon-pdf-smPDF w/ Links
icon-citExport Citation
Figures
+Show more

Nano-Micro Lett. (2018) 10: 46

First Online: 2 April 2018 (Article)

DOI:10.1007/s40820-018-0200-x

*Corresponding author. E-mail: lishd@qdu.edu.cn ; wangxiakuaile@qdu.edu.cn

 

Abstract

 


Toc

A promising anode material composed of SnS2@CoS2 flower-like spheres assembled from SnS2 nanosheets and CoS2 nanoparticles accompanied by reduced graphene oxide (rGO) was fabricated by a facile hydrothermal pathway. The presence of rGO and the combined merits of SnS2 and CoS2 endow the SnS2@CoS2-rGO composite with high conductivity pathways and channels for electrons and with excellent properties as an anode material for sodium-ion batteries (SIBs). A high capacity of 514.0 mAh g−1 at a current density of 200 mA g-1 after 100 cycles and a good rate capability can be delivered. The defined structure and good sodium-storage performance of the SnS2@CoS2-rGO composite demonstrate its promising application in high-performance sodium-ion batteries (SIBs).


 

Keywords

SnS2 nanosheets; CoS2 nanoparticles; Reduced graphene oxide (rGO); Sodium-ion batteries (SIBs)

 

Full Text Html

1 Introduction

    As promising alternatives to lithium-ion batteries (LIBs), sodium-ion batteries (SIBs) have attracted increasing attention, by virtue of the low cost and natural abundance of sodium salts, in combination with a suitable redox potential (−2.71 V vs the standard hydrogen electrode) [1-4]. Nonetheless, the larger radius and slower reaction kinetics of sodium ions compared to those of lithium ions would cause large volume variation and large polarization of anode materials, which lead to poor cycling performance and low reversible capacity [5-8]. Therefore, it is still challenging to find suitable anode materials with excellent sodium-storage performance.

    Previously, a large number of anode materials, including metals [9], metal oxides [10], metal sulfides [11, 12], and metal selenides [13] have been investigated as potential anode materials with high capacity for SIBs. In particular, metal sulfides such as MoS2 [14], CoS2 [15], Fe1-xS [16], Co3S4 [17], In2S3 [18], SnS [19, 20], and Sb2S3 [21, 22] have attracted attention for SIBs owing to their high theoretical capacity, better reversibility and higher electrical conductivity than those of metal oxides. Among them, SnS2 with two-dimensional (2D) layered crystal structure is regarded as a potential anode material for SIBs, based on its large interlayer spacing along the c-axis, which offers an effective diffusion path for the intercalation and exfoliation of Na+ in the charge/discharge process; hence, it could possess fast ion diffusion kinetics and high specific capacity [23, 24]. Nevertheless, owing to low intrinsic electrical conductivity (8.21×10−4 S cm−1) as well as large volume variation during cycling, SnS2 is demonstrated poor cycling stability and rate capability. Various measures have been employed to alleviate this issue, such as reduction of crystal size [25], fabrication of various nanoarchitectures [26], and formation of composites with conductive materials [27, 28].

    CoS2 possesses good thermal stability and low cost, and hence it is considered a suitable anode material for SIBs [29]. However, it exhibits inferior electrochemical properties, which may arise from its sluggish ion transport kinetics with low electrical conductivity (1.63×10−5 S cm−1) [30]. In view of this, combining SnS2 and CoS2 into rationally designed composite architectures could possibly provide synergistic merits. Furthermore, in the discharge/charge process, the Co generated in the conversion reaction of CoS2 can enhance the reversibility of SnS2 [31]. A hierarchical composite assembled from different metal sulfides could not only supply rich redox chemistry and synergistically display the merits of each component, but could also benefit from the interactions of the individual components [30, 32]. For instance, Dong et al. successfully fabricated a polyhedral composite employing a zeolitic imidazolate framework (ZIF-8) as precursor with a ZnS inner-core and Sb2S3/C double-shell as an anode material for SIBs [11]. Compared to ZnS@C, the polyhedron composite presented significantly improved sodium-storage performance with good cycle stability and high specific capacity, ascribed to the cooperative contributions of ZnS, Sb2S3, and C components and a stable structure with sufficient space to alleviate volume variation on cycling. Geng et al. synthesized cobalt sulfide/molybdenum disulfide (Co9S8/MoS2) yolk–shell spheres, which possessed outstanding lithium/sodium-storage performance due to coordination of the yolk–shell structure and the well-distributed mixture consisting of Co9S8 and MoS2 nanocrystals [30]. Fe3O4/Fe1−xS@C@MoS2 nanosheets composed of Fe3O4/Fe1−xS nanoparticles inserted in carbon nanosheets and encapsulated by MoS2 were fabricated by Pan et al., and presented excellent electrochemical performance owing to the synergistic effects of each component [33]. Moreover, Lin et al. reported a novel bicontinuous carbon wrapped NiS2@CoS2 hetero-nanocrystal hierarchical structure, which exhibited superior rate capability and cycle stability for SIBs, benefiting from interconnected porous structures and structural integrity due to double carbon frameworks [34]. Therefore, in order to further develop a metal sulfide composite with better electrochemical performance, their incorporation into a carbon matrix such as carbon nanotubes, graphene, or reduced graphene oxide (rGO) has been proposed, because rGO and graphene exhibit superior electroconductivity, pronounced chemical stability, remarkable flexibility, and high surface area to buffer the mechanical stress experienced during the conversion process [35]. Therefore, the growth of SnS2 and CoS2 on rGO to form a SnS2@CoS2-rGO composite should demonstrate good sodium-storage performance. To our knowledge, this SnS2@CoS2-rGO composite has not been previously employed as an anode material for SIBs.

    In the present study, a SnS2@CoS2-rGO composite was synthesized successfully by a hydrothermal procedure, in which SnS2@CoS2 flower-like spheres assembled by SnS2 nanosheets and CoS2 nanoparticles were composited with rGO sheets. The sodium-storage performance of the composite was evaluated when used as an anode material. An enhanced reversible capacity, long cycling stability, and good rate capability of the composite were obtained. Therefore, the SnS2@CoS2-rGO composite has good potential for use as a highly performing anode material in SIBs. 

2 Experimental Section

2.1 Synthetic Procedures of the SnS2@CoS2-rGO Composite

    Firstly, graphene oxide (GO) was fabricated through a modified Hummers method [36]. The SnS2@CoS2-rGO composite was prepared by a hydrothermal strategy. In a typical procedure, 15 mL of as-obtained GO suspension (2 mg mL-1) was dispersed in 20 mL of DI water and then ultrasonicated for 2 h. Then 0.393 g of L-cysteine, 0.1139 g of SnCl4∙5H2O and 0.0773 g of CoCl2∙6H2O were added into the above GO suspension under stirring. This mixture was sonicated for 2 h and transferred into a 50 mL Teflon-lined stainless-steel autoclave and kept at 180 °C for 24 h. Then, the obtained product was centrifuged and washed with DI water and absolute ethanol 3 times, respectively. The final material was dried at 50 °C for 12 h. For comparison, CoS2-rGO composite was prepared by the same synthetic route as the SnS2@CoS2-rGO composite with the same amount of GO, L-cysteine and CoCl2∙6H2O but without the addition of SnCl4∙5H2O. Similarly, SnS2-rGO composite was synthesized by the same synthetic route without the addition of CoCl2∙6H2O. Additionally, pure rGO was synthesized without the addition of SnCl4∙5H2O or CoCl2∙6H2O. Composites with different amounts of GO (50 and 20 mg) were also fabricated using the same process as the SnS2@CoS2-rGO composite. Finally, composites with different ratios of Co to Sn were prepared by adjusting the molar ratio of CoCl2∙6H2O to SnCl4∙5H2O using the same process.

2.2 Characterization and Instruments

    The phases of the samples were characterized by powder X-ray diffraction (XRD) (SmartLab, Rigaku) with Cu Kα (λ = 1.54178 Å) radiation source. The morphology of the samples was determined by means of scanning electron microscopy (SEM) (JEOL JSM-7800F) and transmission electron microscopy (TEM) (Tecnai G2 F30). The Brunauer Emmett Teller (BET) surface area of the sample was measured on a Quantachrome Autosorb-iQ-MP surface area detecting instrument with N2 physisorption at 77 K. X-ray photoelectron spectroscopy (XPS) was carried out on a PHI 5600 instrument (PerkinElmer, USA). Raman spectroscopy was recorded on a Renishaw spectrometer. Thermogravimetric analysis (TGA) was performed under air flow by a TG 209 (Netzsch). Atomic force microscope (AFM) measurement was recorded on a XE7, Park system. The atomic ratio of Co to Sn was confirmed by inductively coupled plasma optical emission spectrometry (ICP-OES, Prodigy 7, Leeman Labs). Elemental analysis was tested by a VarioELIII elemental analyser, Eementar, Germany.

2.3 Electrochemical Measurements

    At first, the active material, carbon black and carboxymethylcellulose sodium (CMC) binder were fully mixed in a ratio of 70:20:10 (wt%) to form a slurry. Subsequently, the slurry was cast on copper foil by a doctor-blade and dried at 80 °C for 12 h in a vacuum oven. The areal mass loading was around 1.2 mg cm-2. The electrochemical tests were carried out in a CR2032 coin cell with Na metal as the counter electrode. The electrolyte solution was 1.0 mol L-1 NaClO4 in a 1:1 volumetric mixture of propylene carbonate and ethylene carbonate with 5% fluoroethylene carbonate additive. All cells were assembled in an Ar-filled dry box with water and oxygen content lower than 1 ppm. Cyclic voltammetry (CV) curves were obtained by a CHI 660B electrochemical workstation with a scanning rate of 0.2 mV s-1 in the voltage range of 0.01−3.0 V. The cells were galvanostatically cycled between 0.01 and 3.0 V using various currents at room temperature. Electrochemical impedance spectroscopy (EIS) was carried out after cell cycling in the frequency range of 100 kHz–0.01 Hz with a bias signal amplitude of 0.01 V.

3 Results and Discussion

    The XRD patterns of the as-prepared samples are shown in Fig. 1a. It can be seen that all the diffraction peaks are well indexed to the hexagonal SnS2 (JCPDS card No. 23-0677) and cubic CoS2 (JCPDS card No. 41-1471) of the SnS2-rGO composite and CoS2-rGO composite, respectively, in the absence of relevant impurities, revealing pure phases of the SnS2 and CoS2. For the SnS2@CoS2-rGO composite, the main reflections are well ascribed to the characteristic peaks of SnS2 and CoS2. Although the characteristic diffraction peaks of rGO are not observed, this is possibly due to a low degree of crystallinity. Raman spectroscopy further confirms the existence of rGO (Fig. 1b), which presents two peaks centered at 1361 and 1587 cm-1, assigned to disordered carbon (D band) and graphitic carbon (G band), respectively [37]. A small peak at 311 cm-1 is ascribed to the A1g mode of SnS2 [28]. Additionally, compared to pure rGO, the D peak of rGO in the SnS2@CoS2-rGO composite shifted to a slightly lower wavenumber, indicating that the interaction between SnS2@CoS2 and rGO is strong [38, 39]. The rGO content of the composite was detected by TGA (Fig. S1), which exhibits a weight loss of approximately 0.4% between 25 and 200 °C, attributed to the loss of absorbed water, and a ~24.5% decrease from 200 to 900 °C, corresponding to the oxidation of SnS2, CoS2, and combustion of carbon, in accordance with other metal sulfide/carbon studies [16]. Consequently, the content of carbon in the SnS2@CoS2-rGO composite was determined to be around 18.6 wt%. In order to further investigate the graphene content, elemental analysis of the SnS2@CoS2-rGO composite was carried out, which showed the graphene content to be 13.06%. The atomic ratio of Sn and Co was determined to be approximately 1:1 by the ICP-OES method.

Fig. 1 a XRD patterns of the SnS2@CoS2-rGO composite, SnS2-rGO composite and CoS2-rGO composite. b Raman spectra of the SnS2@CoS2-rGO composite and rGO

Fig. 1 a XRD patterns of the SnS2@CoS2-rGO composite, SnS2-rGO composite and CoS2-rGO composite. b Raman spectra of the SnS2@CoS2-rGO composite and rGO

    XPS was used to investigate the electronic states and surface composition of the SnS2@CoS2-rGO composite, presented in Fig. S2 and Fig. 2. Figure S2 shows the survey spectrum, suggesting the existence of Co, Sn, S, and C elements, in accordance with the EDS result. The high-resolution Sn 3d spectrum, shown in Fig. 2a, exhibits two characteristic peaks of SnS2 at 487.0 eV (Sn 3d5/2) and 495.0 eV (Sn 3d3/2) [40], accompanied by two peaks at 486.2 and 496.1 eV, assigned to Sn 3d5/2 and Sn 3d3/2 of SnS, respectively [41]. The XPS peaks at 781.9 and 793.3 eV in the Co 2p spectrum (Fig. 2b) correspond closely to Co 2p3/2 and Co 2p1/2 of CoS2, respectively, whereas another peak at 798.5 eV is assigned to Co 2p1/2 of Co3O4 [42], mainly resulting from partial surface oxidation of the composite [43]. The S 2p spectrum (Fig. 2c) exhibits five peaks at around 161.4, 162.8, 163.8, 168.8, and 169.9 eV. The first three peaks are attributed to characteristic peaks of S2-, S22-, and Sn2-, respectively, indicating the presence of S- and S2-. Meanwhile, the other two peaks at 168.8 and 169.9 eV correspond to S 2p3/2 and S 2p1/2 of SO32-, respectively [16]. Three peaks in the C 1s spectrum at 284.6, 285.9, and 288.7 eV are observed in Fig. 2d, which are attributed to sp2 C-C, C-O, and O-C=O bonds, respectively [44].

Fig. 2 XPS spectra of a Sn 3d, b Co 2p, c S 2p and d C 1s core levels of the SnS2@CoS2-rGO composite

Fig. 2 XPS spectra of a Sn 3d, b Co 2p, c S 2p and d C 1s core levels of the SnS2@CoS2-rGO composite

    The morphology and microstructure of the SnS2@CoS2-rGO composite was investigated using SEM, TEM, HRTEM, and STEM, as shown in Fig. 3. It can be seen that the SnS2@CoS2-rGO composite displays flower-like spherical morphology, composed of nanosheets with random orientation (Fig. 3a, b). In the high-magnification micrograph (Fig. 3c), a large number of nanoparticles with an average size of approximately 45 nm are decorated on the nanosheets. For the SnS2-rGO composite, hierarchical spheres consisting of nanosheets are formed (Fig. S3a). There are no individual SnS2 particles; SnS2 sheets are well dispersed on the rGO (Fig. S3b). Compared with the SnS2-rGO composite, the CoS2-rGO composite exhibits rough rGO sheets (Fig. S3c) over which CoS2 nanoparticles with a mean size of around 50 nm are dispersed (Fig. S3d), in agreement with other reports [45]. Therefore, the SnS2@CoS2-rGO composite appears to be composed of SnS2 nanosheets and CoS2 nanoparticles, in combination with rGO nanosheets.

Fig. 3 a-c low- and high- magnification SEM images, d TEM image, e HRTEM image, f SAED pattern and g-k STEM image and corresponding element mappings of the SnS2@CoS2-rGO composite

Fig. 3 a-c low- and high- magnification SEM images, d TEM image, e HRTEM image, f SAED pattern and g-k STEM image and corresponding element mappings of the SnS2@CoS2-rGO composite

    Furthermore, the TEM image (Fig. 3d) of the SnS2@CoS2-rGO composite indicates CoS2 nanoparticles with a size of approximately 50 nm on the SnS2 nanosheets. The HRTEM image (Fig. 3e) displays two lattice fringes of 0.23 and 0.28 nm attributed to the (101) and (211) planes of SnS2 and CoS2, respectively, accompanied by a disordered lattice fringe of rGO. Meanwhile, the corresponding diffraction rings (Fig. 3f) indicate the polycrystalline nature of the SnS2@CoS2-rGO composite. Additionally, the elemental mapping of the SnS2@CoS2-rGO composite shows that Co, Sn, S, and C are uniformly distributed in the composite, suggesting homogeneous decoration of the SnS2@CoS2-rGO composite (Fig. 3g-k).

Fig. 4 a TEM image, b HRTEM image (inset is SAED pattern), c-f STEM image and corresponding element mappings of the SnS2-rGO composite. g EDS spectrum of SnS2-rGO composite

Fig. 4 a TEM image, b HRTEM image (inset is SAED pattern), c-f STEM image and corresponding element mappings of the SnS2-rGO composite. g EDS spectrum of SnS2-rGO composite

    Figure 4 shows TEM, HRTEM, SAED, mapping images, and EDS spectrum of the SnS2-rGO composite. The SnS2 nanosheets are dispersed over the rGO (Fig. 4a) and the corresponding HRTEM image reveals a lattice spacing of 0.28 nm, corresponding to the (101) plane of SnS2 (Fig. 4b). The SAED image (inset of Fig. 4b) indicates the polycrystalline nature of the SnS2-rGO composite, in which the elements of Sn, S, and C are uniformly dispersed, as seen from the mapping images (Fig. 4c-f). In addition, the ratio of Sn:S was calculated to be 1:2.02 from Fig. 4g. Additionally, CoS2 nanoparticles with a diameter size of around 55 nm are decorated on the rGO, observed from the TEM image of the CoS2-rGO composite (Fig. 5a), in agreement with the SEM image. The HRTEM image exhibits a lattice fringe of 0.23 nm, indexed to the (211) plane of CoS2 (Fig. 5b) and the corresponding SAED also presents the polycrystalline nature of the CoS2-rGO composite (inset of Fig. 5b). The Co, S, and C elements are uniformly distributed in the CoS2-rGO composite, as demonstrated by the elemental mappings (Fig. 5c-f), and the ratio of Co:S was calculated to be 1:2.01, which further demonstrates that the obtained product is CoS2 (Fig. 5g). Meanwhile, the thickness of the rGO nanosheets in the three composites was also determined from the AFM image shown in Fig. S4. It can be clearly seen that the thickness of the rGO sheet is ~4 nm and hence each sheet may be nine or ten layers.

Fig. 5 a TEM image, b HRTEM image (inset is SAED pattern), c-f STEM image and corresponding element mappings of the CoS2-rGO composite. g EDS spectrum of CoS2-rGO composite

Fig. 5 a TEM image, b HRTEM image (inset is SAED pattern), c-f STEM image and corresponding element mappings of the CoS2-rGO composite. g EDS spectrum of CoS2-rGO composite

    To further investigate the porous nature of the SnS2@CoS2-rGO composite, nitrogen adsorption/desorption measurement was performed. Typical IV nitrogen isotherms combined with a large hysteresis loop in the pressure range of 0.5-1.0 (P/P0) (Fig. S5a) reveal the existence of mesopores with a mean size of approximately 5.8 nm (Fig. S5b). Furthermore, the BET specific surface area was calculated to be 12.6 m2 g-1, which would be beneficial for the improvement of electrochemical performance resulting from good interfacial contact between electrolytes and electrode. Consequently, a high sodium-storage ability would be expected [36].

    The sodium-storage performance of the SnS2@CoS2-rGO composite electrode was evaluated to confirm its great promise for SIBs in comparison with those of the SnS2-rGO and CoS2-rGO composite electrodes. The electrochemical process of the SnS2-rGO composite electrode was studied by cyclic voltammograms (CV) in the voltage range of 0.01-3 V at a scan rate of 0.2 mV s-1 and is presented in Fig. S6a. For the 1st cycle, two reduction peaks are clearly seen at around 1.59 and 1.29 V, which originate from the intercalation of sodium ions into the SnS2 layers without phase decomposition [46]. Moreover, a broad reduction peak ranging from 0.2 to 0.6 V is attributed to a conversion reaction to form metallic Sn and Na2S, an alloying reaction to produce NaxSn [47], and the formation of a solid electrolyte film (SEI) [48]. In subsequent cycles, this peak gradually shifted to 0.35 V. In addition, the reduction peak at 0.01 V corresponds to Na+ storage on the rGO. For the 1st anodic scan, the oxidation peak at 1.25 V corresponds to the dealloying reaction of NaxSn. Further, this peak overlapped well in all cycles, which suggests that the alloying/dealloying reaction is highly reversible. Meanwhile, the anodic peak at 2.1 V can be attributed to the oxidation of Sn to form SnS2 and the extrusion of Na+ from NaxSnS2 without phase decomposition [49]. Furthermore, the anodic peak at 1.64 V results from Na+ release on the rGO [28].

Fig. 6 a CV curves of the SnS2@CoS2-rGO composite. b Charge/discharge profiles for the initial three cycles and the 100th cycle of the SnS2@CoS2-rGO composite at a current density of 200 mA g-1. c Cycling performance of the SnS2@CoS2-rGO composite, SnS2-rGO composite, CoS2-rGO composite at a current density of 200 mA g-1, and the corresponding coulombic efficiency of the SnS2@CoS2-rGO composite. d Rate capability of the SnS2@CoS2-rGO, SnS2-rGO and CoS2-rGO composite electrodes at varied current densities from 100 to 4000 mA g−1. e Capacity vs. cycle number of the SnS2@CoS2-rGO composite at higher current densities of 500 and 1000 mA g−1. f Nyquist plots and fitted results of the SnS2@CoS2-rGO composite, SnS2-rGO composite, and CoS2-rGO composite after the 100th cycle at discharged state. Inset: equivalent circuit model of the studied system

Fig. 6 a CV curves of the SnS2@CoS2-rGO composite. b Charge/discharge profiles for the initial three cycles and the 100th cycle of the SnS2@CoS2-rGO composite at a current density of 200 mA g-1. c Cycling performance of the SnS2@CoS2-rGO composite, SnS2-rGO composite, CoS2-rGO composite at a current density of 200 mA g-1, and the corresponding coulombic efficiency of the SnS2@CoS2-rGO composite. d Rate capability of the SnS2@CoS2-rGO, SnS2-rGO and CoS2-rGO composite electrodes at varied current densities from 100 to 4000 mA g−1. e Capacity vs. cycle number of the SnS2@CoS2-rGO composite at higher current densities of 500 and 1000 mA g−1. f Nyquist plots and fitted results of the SnS2@CoS2-rGO composite, SnS2-rGO composite, and CoS2-rGO composite after the 100th cycle at discharged state. Inset: equivalent circuit model of the studied system

    For the CoS2-rGO composite electrode (Fig. S6b), in the 1st cycle, three significant reduction peaks centered at 0.86, 0.57, and 0.43 V can be ascribed to the insertion of Na, the conversion reaction to the formation of Co and Na2S, and the formation of SEI film, respectively [15]. In the subsequent scan, the first two reduction peaks shifted to 1.44 and 0.84 V, respectively, originating from the enhanced kinetics of the electrode. Moreover, two oxidation peaks at 1.83 and 2.04 V may originate from the oxidation of Co and the de-insertion of Na to form CoS2, respectively [29]. Figure 6a shows the CV curves for the SnS2@CoS2-rGO composite. A broad reduction peak ranging from 1.40 to 0.95 V is observed, which may be related to the intercalation of sodium ions into the SnS2 and CoS2 without phase decomposition for the 1st cycle, due to the nature of the SnS2@CoS2-rGO composite. Another evident reduction peak located at around 0.50 V may arise from the conversion reaction to form metallic Sn and Na2S, the alloying reaction to produce NaxSn, and the formation of metallic Co. In addition, a reduction peak at 0.07 V corresponds to sodium ion storage on the rGO. A weak oxidation peak at 1.25 V is observed, which is ascribed to the dealloying reaction of NaxSn to form Sn. In addition, an obvious oxidation peak at 1.86 results from the oxidation of metallic Co [15]. Another oxidation peak at 2.16 V is ascribed to oxidation of Sn and exclusion of Na+ from the NaxSnS2, associated with an oxidation peak at 1.63 V related to the release of Na+ from rGO. In the subsequent cycles, the reduction peaks at 0.50 and 1.40-0.99 V shift gradually to 0.70 and 1.46 V, and the corresponding oxidation peaks also move, which is different from the first cycle, in accordance with previously reported results [15, 50]. Further, the CV curves from the 2nd cycle to the 5th cycle overlap well, suggesting excellent cycling stability and reversibility of the SnS2@CoS2-rGO composite in the sodium-storage process.

    Figure 6b presents the galvanostatic charge/discharge voltage profiles of the SnS2@CoS2-rGO composite electrode at 200 mA g-1, which is consistent with the CV results. The 1st discharge capacity was around 895.3 mAh g-1 below 1.5 V, and the corresponding 1st charge capacity was approximately 652.8 mAh g-1 with two weak voltage plateaus at 0.9-1.3 V and 1.6-1.8 V. Therefore, the initial coulombic efficiency was approximately 72.9%. An initial irreversible capacity loss mainly arises from the presence of SEI film [51], structural re-arrangement of the electrode in the conversion process [52], and electrolyte intercalation into the rGO [53]. Additionally, the 2nd discharge and charge delivered capacities were 611.6 and 600.2 mAh g-1, respectively, while the 3rd discharge and charge capacities were 595.4 and 578.2 mAh g-1, respectively. After 100 cycles, the charge capacity remained at 514.0 mAh g−1 with a coulombic efficiency of 99.5%. The trend of the discharge and charge capacities in combination with corresponding efficiency over 100 cycles at a current density of 200 mA g-1 is presented in Fig. 6c. As can be seen, the SnS2@CoS2-rGO composite electrode possesses a steady capacity of up to 514.0 mAh g-1 after 100 cycles. Additionally, the initial coulombic efficiencies of the SnS2-rGO composite and CoS2-rGO composite are 47.5% and 62.2%, respectively (Fig. S6c). In comparison with the low reversible capacities of the SnS2-rGO composite (340.5 mAh g-1) and CoS2-rGO composite (180.5 mAh g-1) (Fig. 6c), the good sodium-storage performance of the SnS2@CoS2-rGO composite shows that the combination of CoS2 and SnS2 plays a synergistic effect in creating a high-performance material for SIBs. In contrast, pure rGO without SnS2 and CoS2 tested under the same conditions presents a low capacity of 220 mAh g−1 after 100 cycles (Fig. S6d), thus revealing the prominent contribution of SnS2 and CoS2 in the composite electrode. Additionally, compared with previously reported tin sulfide and cobalt sulfide-based anodes, the present material manifests great competitiveness in SIB applications (Table 1).

Table 1 Comparison of the Na-storage performance of reported tin sulfide and cobalt sulfide-based materials

10 3 46 table1

    The SnS2@CoS2-rGO composite also displayed excellent rate capability, as shown in Fig. S6d, S7a. As the current density increases from 200 to 4000 mA g−1, the discharge capacity slightly drops. When the current density reached 200, 400, 500, 1000, 2000, and 4000 mA g−1, the specific capacities were 588, 576, 552, 468, 396, and 330 mAh g−1, respectively, all of which were higher than those of SnS2-rGO and CoS2-rGO composites. Even after testing at 4000 mA g−1, a high reversible capacity similar to the initial value could be achieved when returning the current density to 200 mA g−1. At higher current densities of 500 and 1000 mA g-1, the SnS2@CoS2-rGO composite possesses reversible capacities of 405.8 and 309.8 mAh g-1 with only minor decay over 100 cycles, respectively (Fig. 6e), indicating high rate capability and good cycling stability for the SnS2@CoS2-rGO composite. The improved Na-storage performance of the SnS2@CoS2-rGO composite electrode can be attributed to two factors. First, rGO not only improves electronic conductivity of the composite but also accommodates the large volume variation during the charge/discharge process. Secondly, the synergetic effect of SnS2 and CoS2 can offer an optimal electrode/electrolyte interface [42].

    In order to further reveal the transport kinetics for the SnS2@CoS2-rGO composite, EIS spectra were carried out and the corresponding data are shown in Fig. 6f after 100 cycles at discharged state. The impedance spectra consist of a depressed semicircle in the high frequency region corresponding to the SEI resistance (Rf) and charge transfer impedance (Rct) within the electrode/electrolyte interface, accompanied by a sloping line in the low frequency region associated with diffusion of Na+ within the electrode [56]. By fitting the Nyquist plot of the impedance spectroscopy using an equivalent circuit (inset of Fig. 6f), the value of Rf + Rct for the SnS2@CoS2-rGO composite (54.90 Ω) was lower than those of the SnS2-rGO composite (89.39 Ω) and CoS2-rGO composite (121.11 Ω) (Fig. 6f), suggesting that electron transfer in the SnS2@CoS2-rGO composite electrode is easier. Moreover, EIS spectra of the SnS2@CoS2-rGO composite after various cycles at a current density of 1000 mA g-1 are shown in Fig. S7b. It can be seen that the semicircles in the high frequency range present no obvious change after the 1st, 10th, 30th, or 100th cycles, indicating that there is hardly any significant change of the charge transfer resistance of Na ions to and from the electrodes. Therefore, the cycling performance of the SnS2@CoS2-rGO composite electrode is good [57-59].

    The influence of the amount of rGO on the sodium-storage performance of the SnS2@CoS2-rGO composite was also studied. As shown in Fig. S8a, the capacity of the composite with 20 mg rGO gradually drops upon cycling and stays at 345.8 mAh g-1 after 100 cycles, which derives from insufficient rGO to buffer the volume change. Additionally, when increasing the amount of rGO to 50 mg, the SnS2@CoS2-rGO composite possesses stable cycling performance, but low specific capacity (only 419.7 mAh g−1 after 100 cycles). The excessive rGO could act as a good buffer layer; however, its theoretical sodium-storage capacity is low. As a result, the optimal rGO content is of vital importance for the SnS2@CoS2-rGO composite electrode; when the amount of rGO is 30 mg, the sodium-storage performance should be best.

    Samples with different ratios of Co to Sn were also prepared by adjusting the molar ratio of CoCl2∙6H2O:SnCl4∙5H2O, and the corresponding sodium-storage performance was shown in Fig. S8b. The capacity of the composite with atomic ratios of Co: Sn of 1:4 and 1:2 gradually drop upon cycling and stay at 289.2 and 352.2 mAh g-1 after 100 cycles. When this ratio is changed to 2:1, 4:1, or 8:1, the SnS2@CoS2-rGO composite possesses stable cycling performance, but somewhat low specific capacity (only 489.4, 454.6, and 435.3 mAh g−1 after 100 cycles, respectively). As a result, when the atomic ratio of Co:Sn was 1:1, the sodium-storage performance was best.

    The morphology and structure of the SnS2@CoS2-rGO composite after the charge/discharge process are shown in Fig. S9. Figure S9a, b indicates that the nanoparticles are decorated on the rGO. There are two lattice fringes of 0.313 and 0.214 nm, attributed to the (100) and (102) planes of SnS2 and a lattice spacing of 0.277 nm, ascribed to the (200) plane of CoS2 (Fig. S9c). Lattice fringes of SnS2 and CoS2 are also observed in Fig. S9d, which indicates that the SnS2 and CoS2 can be regenerated after 100 cycles, which is the key factor for cycling stability of the SnS2@CoS2-rGO composite [60].

4 Conclusions

    In summary, a SnS2@CoS2-rGO composite was synthesized by a facile hydrothermal strategy. The obtained composite, assembled with SnS2 nanosheets and CoS2 nanoparticles along with rGO sheets with good contact interface, possessed high specific capacity, excellent rate capability, and good cycling stability (514.0 mAh g-1 at 200 mA g-1 after 100 cycles) as an anode material for SIBs. The excellent performance of the SnS2@CoS2-rGO composite can be ascribed to the rGO acting as a highly conductive matrix and the combined effect of SnS2 and CoS2, which are beneficial for mitigating the volume change and offer fast electron transport due to good electronic contact. Consequently, the SnS2@CoS2-rGO composite is a promising candidate for application in SIBs.

Acknowledgements

    This work is financially supported by National Nature Science Foundation of China (11674187, 11604172, and 11504192), Program of Science and Technology in Qingdao City (16-5-1-2-jch), and China Postdoctoral Science Foundation (2015M570570, and 2017M622138).

References

[1] D.L. Chao, C.R. Zhu, P.H. Yang, X.H. Xia, J.L. Liu et al., Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance. Nat. Commun. 7, 12122 (2016). https://doi.org/10.1038/ncomms12122
[2] W. Luo, F. Shen, C. Bommier, H.L. Zhu, X.L. Ji, L.B. Hu, Na-ion battery anodes: materials and electrochemistry. Accounts Chem. Res. 49(2), 231-240 (2016). https://doi.org/10.1021/acs.accounts.5b00482
[3] H.G. Wang, S. Yuan, D.L. Ma, X.B. Zhang, J.M. Yan, Electrospun materials for lithium and sodium rechargeable batteries: from structure evolution to electrochemical performance. Energy Environ. Sci. 8(6), 1660-1681 (2015). https://doi.org/10.1039/C4EE03912B
[4] H.G. Wang, S. Yuan, Z.J. Si, X.B. Zhang, Multi-ring aromatic carbonyl compounds enabling high capacity and stable performance of sodium-organic batteries. Energy Environ. Sci. 8(11), 3160-3165 (2015). https://doi.org/10.1039/C5EE02589C
[5] M.M. Lao, Y. Zhang, W.B. Luo, Q.Y. Yan, W.P. Sun, S.X. Dou, Alloy-based anode materials toward advanced sodium-ion batteries. Adv. Mater. 29(48), 1700622 (2017). https://doi.org/10.1002/adma.201700622
[6] S. Yuan, Y.B. Liu, D. Xu, D.L. Ma, S. Wang, X.H. Yang, Z.Y. Cao, X.B. Zhang, Pure single-crystalline Na1.1V3O7.9 nanobelts as superior cathode materials for rechargeable sodium-ion batteries. Adv. Sci. 2(3), 1400018-1400023 (2015). https://doi.org/10.1002/advs.201400018
[7] S. Wang, T. Sun, S. Yuan, Y.H. Zhu, X.B. Zhang, J.M. Yan, Q. Jiang, P3-type K0.33Co0.53Mn0.47O2ž0.39H2O: a novel bifunctional electrode for Na-ion batteries. Mater. Horizons 4(6), 1122-1127 (2017). https://doi.org/10.1039/C7MH00512A
[8] H. Gao, T.F. Zhou, Y. Zheng, Q. Zhang, Y.Q. Liu, J. Chen, H.K. Liu, Z.P. Guo, CoS quantum dot nanoclusters for high energy potassium ion batteries. Adv. Funct. Mater. 27(43), 1702634 (2017). https://doi.org/10.1002/adfm.201702634
[9] B. Luo, T.F. Qiu, D.L. Ye, L.Z. Wang, L.J. Zhi, Tin nanoparticles encapsulated in graphene backboned carbonaceous foams as high-performance anodes for lithium-ion and sodium-ion storage. Nano Energy 22, 232-240 (2016). https://doi.org/10.1016/j.nanoen.2016.02.024
[10] M.L. Mao, F.L. Yan, C.Y. Cui, J.M. Ma, M. Zhang, T.H. Wang, C.S. Wang, Pipe-wire TiO2Sn@carbon nanofibers paper anodes for lithium and sodium ion batteries. Nano Lett. 17(6), 3830-3836 (2017). https://doi.org/10.1021/acs.nanolett.7b01152
[11] S.H. Dong, C.X. Li, X.L. Ge, Z.Q. Li, X.G. Miao, L.W. Yin, ZnS-Sb2S3@C core-double shell polyhedron structure derived from metal−organic framework as anodes for high performance sodium ion batteries. ACS Nano 11(6), 6474-6482 (2017). https://doi.org/10.1021/acsnano.7b03321
[12] S. Yuan, S. Wang, L. Li, Y.H. Zhu, X.B. Zhang, J.M. Yan, Integrating 3D flower-like hierarchical Cu2NiSnS4 with reduced graphene oxide as advanced anode materials for Na-ion batteries. ACS Appl. Mater. Interfaces 8(14), 9178-9184 (2016). https://doi.org/10.1021/acsami.6b01725
[13] S. Yuan, Y.H. Zhu, W. Li, S. Wang, D. Xu, L. Li, Y. Zhang, X.B. Zhang, Surfactant-free aqueous synthesis of pure single-crystalline SnSe nanosheet clusters as anode for high energy- and power-density sodium-ion batteries. Adv. Mater. 29(4), 1602469 (2017). https://doi.org/10.1002/adma.201602469
[14] X.Q. Xie, T. Makaryan, M.Q. Zhao, K.L.V. Aken, Y. Gogotsi, G.X. Wang, MoS2 nanosheets vertically aligned on carbon paper: a freestanding electrode for highly reversible sodium-ion batteries. Adv. Energy Mater. 6(5), 1502161 (2016). https://doi.org/10.1002/aenm.201502161
[15] S.J. Peng, X.P. Han, L.L. Li, Z.Q. Zhu, F.Y. Cheng, M. Srinivansan, S. Adams, S. Ramakrishna, Unique cobalt sulfide/reduced graphene oxide composite as an anode for sodium-ion batteries with superior rate capability and long cycling stability. Small 12(10), 1359-1368 (2016). https://doi.org/10.1002/smll.201502788
[16] Y. Xiao, J.Y. Hwang, I. Belharouak, Y.K. Sun, Na storage capability investigation of a carbon nanotube-encapsulated Fe1−xS composite. ACS Energy Lett. 2(2), 364-372 (2017). https://doi.org/10.1021/acsenergylett.6b00660
[17] Q. Zhou, L. Liu, Z.F. Huang, L.G. Yi, X.Y. Wang, G.Z. Cao, Co3S4@polyaniline nanotubes as high-performance anode materials for sodium ion batteries. J. Mater. Chem. A 4(15), 5505-5516 (2016). https://doi.org/10.1039/C6TA01497F
[18] X. Wang, J.Y. Hwang, S.T. Myung, J. Hassoun, Y.K. Sun, Graphene decorated by indium sulfide nanoparticles as high-performance anode for sodium-ion batteries. ACS Appl. Mater. Interfaces 9(28), 23723-23730 (2017). https://doi.org/10.1021/acsami.7b05057
[19] X.H. Xiong, C.H. Yang, G.H. Wang, Y.W. Lin, X. Ou et al., SnS nanoparticles electrostatically anchored on three-dimensional N-doped graphene as an active and durable anode for sodium-ion batteries. Energy Environ. Sci. 10(8), 1757-1763 (2017). https://doi.org/10.1039/C7EE01628J
[20] T.F. Zhou, W.K. Pang, C.F. Zhang, J.P. Yang, Z.X. Chen, H.K. Liu, Z.P. Guo, Enhanced sodium-ion battery performance by structural phase transition from two-dimensional hexagonal-SnS2 to orthorhombic-SnS. ACS Nano 8(8), 8323-8333(2014). https://doi.org/10.1021/nn503582c
[21] S. Wang, S. Yuan, Y.B. Yin, Y.H. Zhu, X.B. Zhang, J.M. Yan, Green and facile fabrication of MWNTs@Sb>2S3@PPy coaxial nanocables for high-performance Na-ion batteries. Part. Part. Syst. Charact. 33(8), 493-499 (2016). https://doi.org/10.1002/ppsc.201500227
[22] J.J. Xie, L. Liu, J. Xia, Y. Zhang, M. Li, Y.O. Yang, S. Nie, X.Y. Wang, Template-free synthesis of Sb2S3 hollow microspheres as anode materials for lithium-ion and sodium-ion batteries. Nano-Micro Lett. 10(1), 12 (2018). https://doi.org/10.1007/s40820-017-0165-1
[23] J.J. Wang, C. Luo, J.F. Mao, Y.J. Zhu, X.L. Fan, T. Gao, A.C. Mignerey, C.S. Wang, Solid-state fabrication of SnS2/C nanospheres for high-performance sodium ion battery anode. ACS Appl. Mater. Interfaces 7(21), 11476-11481 (2015). https://doi.org/10.1021/acsami.5b02413
[24] R.J. Wei, J.C. Hu, T.F. Zhou, X.L. Zhou, J.X. Liu, J.L. Li, Ultrathin SnS2 nanosheets with exposed {001} facets and enhanced photocatalytic properties. Acta Mate. 66(3), 163-171 (2014). https://doi.org/10.1016/j.actamat.2013.11.076
[25] Y. Jiang, Y.Z. Feng, B.J. Xi, S.S. Kai, K. Mi, J.K. Feng, J.H. Zhang, S.L. Xiong, Ultrasmall SnS2 nanoparticles anchored on well distributed nitrogen-doped graphene sheets for Li-ion and Na-ion batteries. J. Mater. Chem. A 4(27), 10719-10726 (2016). https://doi.org/10.1039/C6TA03580A
[26] D.L. Chao, P. Liang, Z. Chen, L.Y. Bai, H. Shen et al., Pseudocapacitive Na-ion storage boosts high rate and areal capacity of self-branched 2D layered metal chalcogenide nanoarrays. ACS Nano 10(11), 10211-10219 (2016). https://doi.org/10.1021/acsnano.6b05566
[27] Y. Liu, Y.Z. Yang, X.Z. Wang, Y.F. Dong, Y.C. Tang, Z.F. Yu, Z.B. Zhao, J.S. Qiu, Flexible paper-like free-standing electrodes by anchoring ultrafine SnS2 nanocrystals on graphene nanoribbons for high-performance sodium ion batteries. ACS Appl. Mater. Interfaces 9(18), 15484-15491 (2017). https://doi.org/10.1021/acsami.7b02394
[28] Y.C. Liu, H.Y. Kang, L.F. Jiao, C.C. Chen, K.Z. Cao, Y.J. Wang, H.T. Yuan, Exfoliated-SnS2 restacked on graphene as a high-capacity, high-rate, and long-cycle life anode for sodium ion batteries. Nanoscale 7(4), 1325-1332 (2015). https://doi.org/10.1039/C4NR05106H
[29] Q.F. Wang, R.Q. Zou, W. Xia, J. Ma, B. Qiu et al., Facile synthesis of ultrasmall CoS2 nanoparticles within thin N-doped porous carbon shell for high performance lithium-ion batteries. Small 11(21), 2511-2517 (2015). https://doi.org/10.1002/smll.201403579
[30] H.B. Geng, J. Yang, Z.F. Dai, Y. Zhang, Y. Zheng et al., Co9S8/MoS2 yolk–shell spheres for advanced Li/Na Storage. Small 13(14), 1603490 (2017). https://doi.org/10.1002/smll.201603490
[31] W.-S. Kim, Y. Hwa, H.-C. Kim, J.-H. Choi, H.-J. Sohn, S.-H. Hong, SnO2@Co3O4 hollow nano-spheres for a Li-ion battery anode with extraordinary performance. Nano Res. 7(8), 1128-1136 (2014). https://doi.org/10.1007/s12274-014-0475-2
[32] H. Yu, H.S. Fan, X.L. Wu, H.W. Wang, Z.Z. Luo, H.T. Tan, B.L.Yadian, Y.Z. Huang, Q.Y. Yan, Diffusion induced concave Co3O4@CoFe2O4 hollow heterostructures for high performance lithium ion battery anode. Energy Storage Mater. 4, 145-153 (2016). https://doi.org/10.1016/j.ensm.2016.05.005
[33] Q.C. Pan, F.H. Zheng, X. Ou, C.H. Yang, X.H. Xiong, Z.H. Tang, L.Z. Zhao, M.L. Liu, MoS2 decorated Fe3O4/Fe1xS@C nanosheets as high-performance anode materials for lithium ion and sodium ion batteries. ACS Sustain. Chem. Eng. 5(6), 4739-4745 (2017). https://doi.org/10.1021/acssuschemeng.7b00119
[34] Y.M. Lin, Z.Z. Qiu, D.Z. Li, S. Ullah, Y. Hai et al., NiS2@CoS2 nanocrystals encapsulated in N-doped carbon nanocubes for high performance lithium/sodium ion batteries. Energy Storage Mater. 11, 67-74 (2018). https://doi.org/10.1016/j.ensm.2017.06.001
[35] X. Ou, C.H. Yang, X.H. Xiong, F.H. Zheng, Q.C. Pan, C. Jin, M.L. Liu, K. Huang, A new rGO-overcoated Sb2Se3 nanorods anode for Na+ battery: in situ X-ray diffraction study on a live sodiation/desodiation process. Adv. Funct. Mater. 27(13), 1606242 (2017). https://doi.org/10.1002/adfm.201606242
[36] X. Wang, Y. Xiao, J.Q. Wang, L.N. Sun, M.H. Cao, Facile fabrication of molybdenum dioxide/nitrogen-doped graphene hybrid as high performance anode material for lithium ion batteries. J. Power Sources 274, 142-148 (2015). https://doi.org/10.1016/j.jpowsour.2014.10.031
[37] F.E. Niu, J. Yang, N.N. Wang, D.P. Zhang, W.L. Fan, J. Yang, Y.T. Qian, MoSe2-covered N,P-doped carbon nanosheets as a long-life and high-rate anode material for sodium-ion batteries. Adv. Funct. Mater. 27(23), 1700522 (2017). https://doi.org/10.1002/adfm.201700522
[38] Y.L. Xiao, X.M. Li, J.T. Zai, K.X. Wang, Y. Gong, B. Li, Q.Y. Han, X.F. Qian, CoFe2O4-graphene nanocomposites synthesized through an ultrasonic method with enhanced performances as anode materials for Li-ion batteries. Nano-Micro Lett. 6(4), 307-315 (2014). https://doi.org/10.1007/s40820-014-0003-7
[39] Y.L. Xiao, J.T. Zai, B.B. Tian, X.F. Qian, Formation of NiFe2O4/expanded graphite nanocomposites with superior lithium storage properties. Nano-Micro Lett. 9(3), 34 (2017). https://doi.org/10.1007/s40820-017-0127-7
[40] Y. Jiang, M. Wei, J.K. Feng, Y.C. Ma, S.L. Xiong, Enhancing the cycling stability of Na-ion batteries by bonding SnS2 ultrafine nanocrystals on amino-functionalized graphene hybrid nanosheets. Energy Environ. Sci. 9(4), 1430-1438 (2016). https://doi.org/10.1039/C5EE03262H
[41] Y. Zheng, T.F. Zhou, C.F. Zhang, J.F. Mao, H.K. Liu, Z.P. Guo, Boosted charge transfer in SnS/SnO2 heterostructures: toward high rate capability for sodium-ion batteries. Angew. Chem. Int. Ed. 55(10), 3408-3413 (2016). https://doi.org/10.1002/anie.201510978
[42] Y.X. Guo, L.F. Gan, C.S. Shang, E.K. Wang, J. Wang, A cake-style CoS2@MoS2/RGO hybrid catalyst for efficient hydrogen evolution. Adv. Funct. Mater. 27(5), 1602699 (2017). https://doi.org/10.1002/adfm.201602699
[43] Y.P. Zhu, T.Y. Ma, M. Jaroniec, S.Z. Qiao, Self-templating synthesis of hollow Co3O4 microtube arrays for highly efficient water electrolysis. Angew. Chem. 56(5), 1324-1328 (2017). https://doi.org/10.1002/anie.201610413
[44] X. Wang, H. Wang, Q. Li, H.S. Li, G.X. Zhao, H.L. Li, P.Z. Guo, S.D. Li, Y.K. Sun, Antimony selenide nanorods decorated on reduced graphene oxide with excellent electrochemical properties for Li-ion batteries. J. Electrochem. Soc. 164(13), A2922-A2929 (2017). https://doi.org/10.1149/2.0201713jes
[45] D.C. Higgins, F.M. Hassan, M.H. Seo, J.Y. Choi, M.A. Hoque, D.U. Lee, Z. Chen, Shape-controlled octahedral cobalt disulfide nanoparticles supported on nitrogen and sulfur-doped graphene/carbon nanotube composites for oxygen reduction in acidic electrolyte. J. Mater. Chem. A 3(12), 6340-6350 (2015). https://doi.org/10.1039/C4TA06667G
[46] W.N. Deng, X.H. Chen, Z. Liu, A.P. Hu, Q.L. Tang, Z. Li, Y.N. Xiong, Three-dimensional structure-based tin disulfide/vertically aligned carbon nanotube arrays composites as high-performance anode materials for lithium ion batteries. J. Power Sources 277, 131-138 (2015). https://doi.org/10.1016/j.jpowsour.2014.12.006
[47] Y.D. Ren, W.M. Lv, F.S. Wen, J.Y. Xiang, Z.Y. Liu, Microwave synthesis of SnS2 nanoflakes anchored graphene foam for flexible lithium-ion battery anodes with long cycling life. Mater. Lett. 174, 24-27 (2016). https://doi.org/10.1016/j.matlet.2016.03.075
[48] C.Z. Ma, J. Xu, J. Alvarado, B.H. Qu, J. Somerville, J.Y. Lee, Y.S. Meng, Investigating the energy storage mechanism of SnS2-rGO composite anode for advanced Na-ion batteries. Chem. Mater. 27(16), 5633-5640 (2015). https://doi.org/10.1021/acs.chemmater.5b01984
[49] H.Y. Sun, M. Ahmad, J. Luo, Y.Y. Shi, W.C. Shen, J. Zhu, SnS2 nanoflakes decorated multiwalled carbon nanotubes as high performance anode materials for lithium-ion batteries. Mater. Res. Bull. 49, 319-324 (2014). https://doi.org/10.1016/j.materresbull.2013.09.005
[50] Y.M. Wang, J.J. Wu, Y.F. Tang, X.J. Lu, C.Y. Yang, M.S. Qin, F.Q. Huang, X. Li, X. Zhang, Phase-controlled synthesis of cobalt sulfides for lithium ion batteries. ACS Appl. Mater. Interfaces 4(48), 4246-4250 (2012). https://doi.org/10.1021/am300951f
[51] X. Zhao, J.H. Sui, F. Li, H.T. Fang, H.E. Wang, J.Y. Li, W. Cai, G.Z. Cao, Lamellar MoSenanosheets embedded with MoO2 nanoparticles: novel hybrid nanostructures promoted excellent performances for lithium ion batteries. Nanoscale 8(41), 17902-17910 (2016). https://doi.org/10.1039/C6NR05584B
[52] K. Zhang, M. Park, L.M. Zhou, G.H. Lee, W.J. Li, Y.M. Kang, J. Chen, Urchin-like CoSe2 as a high-performance anode material for sodium-ion batteries. Adv. Funct. Mater. 26(37), 6728-6735 (2016). https://doi.org/10.1002/adfm.201602608
[53] L.W. Ji, Z. Lin, M. Alcoutlabi, X.W. Zhang, Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries. Energy Environ. Sci. 4(8) 2682-2699 (2011). https://doi.org/10.1039/c0ee00699h
[54] K.Y. Xie, L. Li, X. Deng, W. Zhou, Z.P. Shao, A strongly coupled CoS2/reduced graphene oxide nanostructure as an anode material for efficient sodium-ion batteries. J. Alloys Compd. 726, 394-402 (2017). https://doi.org/10.1016/j.jallcom.2017.07.339
[55] Y.H. Zhang, N.N. Wang, C.H. Sun, Z.X. Lu, P. Xue, B. Tang, Z.C. Bai, S.X. Dou, 3D spongy CoS2 nanoparticles/carbon composite as high-performance anode material for lithium/sodium ion batteries. Chem. Eng. J. 332, 370-376 (2018). https://doi.org/10.1016/j.cej.2017.09.092
[56] Y.Z. Qin, Q. Li, J. Xu, X. Wang, G.X. Zhao et al., CoO-Co nanocomposite anode with enhanced electrochemical performance for lithium-ion batteries. Electrochim. Acta 224, 90-95 (2017). https://doi.org/10.1016/j.electacta.2016.12.040
[57] X.J. Liu, J.T. Zai, B. Li, J. Zou, Z.F. Ma, X.F. Qian, Na2Ge4O9 nanoparticles encapsulated in 3D carbon networks with long-term stability and superior rate capability in lithium ion batteries. J. Mater. Chem. A 4(27), 10552-10557 (2016). https://doi.org/10.1039/C6TA03085H
[58] X.M. Li, T.Y. Qian, J.T. Zai, K. He, Z.X. Feng, X.F. Qian, Co stabilized metallic 1Td MoS2 monolayers: bottom-up synthesis and enhanced capacitance with ultra-long cycling stability. Materials Today Energy 7, 10-17 (2018). https://doi.org/10.1016/j.mtener.2017.11.004
[59] X.M. Li, Z.X. Feng, J.T. Zai, Z.F. Ma, X.F. Qian, Incorporation of Co into MoS2/graphene nanocomposites: one effective way to enhance the cycling stability of Li/Na storage. J. Power Sources 373, 103-109 (2018). https://doi.org/10.1016/j.jpowsour.2017.10.094
[60] X.M. Li, J.T. Zai, S.J. Xiang, Y.Y. Liu, X.B. He, Z.Y. Xu, K.X. Wang, Z.F. Ma, X.F. Qian, Regeneration of metal sulfides in the delithiation process: the key to cyclic stability. Adv. Energy Mater. 6(19), 1601056 (2016). https://doi.org/10.1002/aenm.201601056

References

[1] D.L. Chao, C.R. Zhu, P.H. Yang, X.H. Xia, J.L. Liu et al., Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance. Nat. Commun. 7, 12122 (2016). https://doi.org/10.1038/ncomms12122
[2] W. Luo, F. Shen, C. Bommier, H.L. Zhu, X.L. Ji, L.B. Hu, Na-ion battery anodes: materials and electrochemistry. Accounts Chem. Res. 49(2), 231-240 (2016). https://doi.org/10.1021/acs.accounts.5b00482
[3] H.G. Wang, S. Yuan, D.L. Ma, X.B. Zhang, J.M. Yan, Electrospun materials for lithium and sodium rechargeable batteries: from structure evolution to electrochemical performance. Energy Environ. Sci. 8(6), 1660-1681 (2015). https://doi.org/10.1039/C4EE03912B
[4] H.G. Wang, S. Yuan, Z.J. Si, X.B. Zhang, Multi-ring aromatic carbonyl compounds enabling high capacity and stable performance of sodium-organic batteries. Energy Environ. Sci. 8(11), 3160-3165 (2015). https://doi.org/10.1039/C5EE02589C
[5] M.M. Lao, Y. Zhang, W.B. Luo, Q.Y. Yan, W.P. Sun, S.X. Dou, Alloy-based anode materials toward advanced sodium-ion batteries. Adv. Mater. 29(48), 1700622 (2017). https://doi.org/10.1002/adma.201700622
[6] S. Yuan, Y.B. Liu, D. Xu, D.L. Ma, S. Wang, X.H. Yang, Z.Y. Cao, X.B. Zhang, Pure single-crystalline Na1.1V3O7.9 nanobelts as superior cathode materials for rechargeable sodium-ion batteries. Adv. Sci. 2(3), 1400018-1400023 (2015). https://doi.org/10.1002/advs.201400018
[7] S. Wang, T. Sun, S. Yuan, Y.H. Zhu, X.B. Zhang, J.M. Yan, Q. Jiang, P3-type K0.33Co0.53Mn0.47O2ž0.39H2O: a novel bifunctional electrode for Na-ion batteries. Mater. Horizons 4(6), 1122-1127 (2017). https://doi.org/10.1039/C7MH00512A
[8] H. Gao, T.F. Zhou, Y. Zheng, Q. Zhang, Y.Q. Liu, J. Chen, H.K. Liu, Z.P. Guo, CoS quantum dot nanoclusters for high energy potassium ion batteries. Adv. Funct. Mater. 27(43), 1702634 (2017). https://doi.org/10.1002/adfm.201702634
[9] B. Luo, T.F. Qiu, D.L. Ye, L.Z. Wang, L.J. Zhi, Tin nanoparticles encapsulated in graphene backboned carbonaceous foams as high-performance anodes for lithium-ion and sodium-ion storage. Nano Energy 22, 232-240 (2016). https://doi.org/10.1016/j.nanoen.2016.02.024
[10] M.L. Mao, F.L. Yan, C.Y. Cui, J.M. Ma, M. Zhang, T.H. Wang, C.S. Wang, Pipe-wire TiO2Sn@carbon nanofibers paper anodes for lithium and sodium ion batteries. Nano Lett. 17(6), 3830-3836 (2017). https://doi.org/10.1021/acs.nanolett.7b01152
[11] S.H. Dong, C.X. Li, X.L. Ge, Z.Q. Li, X.G. Miao, L.W. Yin, ZnS-Sb2S3@C core-double shell polyhedron structure derived from metal−organic framework as anodes for high performance sodium ion batteries. ACS Nano 11(6), 6474-6482 (2017). https://doi.org/10.1021/acsnano.7b03321
[12] S. Yuan, S. Wang, L. Li, Y.H. Zhu, X.B. Zhang, J.M. Yan, Integrating 3D flower-like hierarchical Cu2NiSnS4 with reduced graphene oxide as advanced anode materials for Na-ion batteries. ACS Appl. Mater. Interfaces 8(14), 9178-9184 (2016). https://doi.org/10.1021/acsami.6b01725
[13] S. Yuan, Y.H. Zhu, W. Li, S. Wang, D. Xu, L. Li, Y. Zhang, X.B. Zhang, Surfactant-free aqueous synthesis of pure single-crystalline SnSe nanosheet clusters as anode for high energy- and power-density sodium-ion batteries. Adv. Mater. 29(4), 1602469 (2017). https://doi.org/10.1002/adma.201602469
[14] X.Q. Xie, T. Makaryan, M.Q. Zhao, K.L.V. Aken, Y. Gogotsi, G.X. Wang, MoS2 nanosheets vertically aligned on carbon paper: a freestanding electrode for highly reversible sodium-ion batteries. Adv. Energy Mater. 6(5), 1502161 (2016). https://doi.org/10.1002/aenm.201502161
[15] S.J. Peng, X.P. Han, L.L. Li, Z.Q. Zhu, F.Y. Cheng, M. Srinivansan, S. Adams, S. Ramakrishna, Unique cobalt sulfide/reduced graphene oxide composite as an anode for sodium-ion batteries with superior rate capability and long cycling stability. Small 12(10), 1359-1368 (2016). https://doi.org/10.1002/smll.201502788
[16] Y. Xiao, J.Y. Hwang, I. Belharouak, Y.K. Sun, Na storage capability investigation of a carbon nanotube-encapsulated Fe1−xS composite. ACS Energy Lett. 2(2), 364-372 (2017). https://doi.org/10.1021/acsenergylett.6b00660
[17] Q. Zhou, L. Liu, Z.F. Huang, L.G. Yi, X.Y. Wang, G.Z. Cao, Co3S4@polyaniline nanotubes as high-performance anode materials for sodium ion batteries. J. Mater. Chem. A 4(15), 5505-5516 (2016). https://doi.org/10.1039/C6TA01497F
[18] X. Wang, J.Y. Hwang, S.T. Myung, J. Hassoun, Y.K. Sun, Graphene decorated by indium sulfide nanoparticles as high-performance anode for sodium-ion batteries. ACS Appl. Mater. Interfaces 9(28), 23723-23730 (2017). https://doi.org/10.1021/acsami.7b05057
[19] X.H. Xiong, C.H. Yang, G.H. Wang, Y.W. Lin, X. Ou et al., SnS nanoparticles electrostatically anchored on three-dimensional N-doped graphene as an active and durable anode for sodium-ion batteries. Energy Environ. Sci. 10(8), 1757-1763 (2017). https://doi.org/10.1039/C7EE01628J
[20] T.F. Zhou, W.K. Pang, C.F. Zhang, J.P. Yang, Z.X. Chen, H.K. Liu, Z.P. Guo, Enhanced sodium-ion battery performance by structural phase transition from two-dimensional hexagonal-SnS2 to orthorhombic-SnS. ACS Nano 8(8), 8323-8333(2014). https://doi.org/10.1021/nn503582c
[21] S. Wang, S. Yuan, Y.B. Yin, Y.H. Zhu, X.B. Zhang, J.M. Yan, Green and facile fabrication of MWNTs@Sb>2S3@PPy coaxial nanocables for high-performance Na-ion batteries. Part. Part. Syst. Charact. 33(8), 493-499 (2016). https://doi.org/10.1002/ppsc.201500227
[22] J.J. Xie, L. Liu, J. Xia, Y. Zhang, M. Li, Y.O. Yang, S. Nie, X.Y. Wang, Template-free synthesis of Sb2S3 hollow microspheres as anode materials for lithium-ion and sodium-ion batteries. Nano-Micro Lett. 10(1), 12 (2018). https://doi.org/10.1007/s40820-017-0165-1
[23] J.J. Wang, C. Luo, J.F. Mao, Y.J. Zhu, X.L. Fan, T. Gao, A.C. Mignerey, C.S. Wang, Solid-state fabrication of SnS2/C nanospheres for high-performance sodium ion battery anode. ACS Appl. Mater. Interfaces 7(21), 11476-11481 (2015). https://doi.org/10.1021/acsami.5b02413
[24] R.J. Wei, J.C. Hu, T.F. Zhou, X.L. Zhou, J.X. Liu, J.L. Li, Ultrathin SnS2 nanosheets with exposed {001} facets and enhanced photocatalytic properties. Acta Mate. 66(3), 163-171 (2014). https://doi.org/10.1016/j.actamat.2013.11.076
[25] Y. Jiang, Y.Z. Feng, B.J. Xi, S.S. Kai, K. Mi, J.K. Feng, J.H. Zhang, S.L. Xiong, Ultrasmall SnS2 nanoparticles anchored on well distributed nitrogen-doped graphene sheets for Li-ion and Na-ion batteries. J. Mater. Chem. A 4(27), 10719-10726 (2016). https://doi.org/10.1039/C6TA03580A
[26] D.L. Chao, P. Liang, Z. Chen, L.Y. Bai, H. Shen et al., Pseudocapacitive Na-ion storage boosts high rate and areal capacity of self-branched 2D layered metal chalcogenide nanoarrays. ACS Nano 10(11), 10211-10219 (2016). https://doi.org/10.1021/acsnano.6b05566
[27] Y. Liu, Y.Z. Yang, X.Z. Wang, Y.F. Dong, Y.C. Tang, Z.F. Yu, Z.B. Zhao, J.S. Qiu, Flexible paper-like free-standing electrodes by anchoring ultrafine SnS2 nanocrystals on graphene nanoribbons for high-performance sodium ion batteries. ACS Appl. Mater. Interfaces 9(18), 15484-15491 (2017). https://doi.org/10.1021/acsami.7b02394
[28] Y.C. Liu, H.Y. Kang, L.F. Jiao, C.C. Chen, K.Z. Cao, Y.J. Wang, H.T. Yuan, Exfoliated-SnS2 restacked on graphene as a high-capacity, high-rate, and long-cycle life anode for sodium ion batteries. Nanoscale 7(4), 1325-1332 (2015). https://doi.org/10.1039/C4NR05106H
[29] Q.F. Wang, R.Q. Zou, W. Xia, J. Ma, B. Qiu et al., Facile synthesis of ultrasmall CoS2 nanoparticles within thin N-doped porous carbon shell for high performance lithium-ion batteries. Small 11(21), 2511-2517 (2015). https://doi.org/10.1002/smll.201403579
[30] H.B. Geng, J. Yang, Z.F. Dai, Y. Zhang, Y. Zheng et al., Co9S8/MoS2 yolk–shell spheres for advanced Li/Na Storage. Small 13(14), 1603490 (2017). https://doi.org/10.1002/smll.201603490
[31] W.-S. Kim, Y. Hwa, H.-C. Kim, J.-H. Choi, H.-J. Sohn, S.-H. Hong, SnO2@Co3O4 hollow nano-spheres for a Li-ion battery anode with extraordinary performance. Nano Res. 7(8), 1128-1136 (2014). https://doi.org/10.1007/s12274-014-0475-2
[32] H. Yu, H.S. Fan, X.L. Wu, H.W. Wang, Z.Z. Luo, H.T. Tan, B.L.Yadian, Y.Z. Huang, Q.Y. Yan, Diffusion induced concave Co3O4@CoFe2O4 hollow heterostructures for high performance lithium ion battery anode. Energy Storage Mater. 4, 145-153 (2016). https://doi.org/10.1016/j.ensm.2016.05.005
[33] Q.C. Pan, F.H. Zheng, X. Ou, C.H. Yang, X.H. Xiong, Z.H. Tang, L.Z. Zhao, M.L. Liu, MoS2 decorated Fe3O4/Fe1xS@C nanosheets as high-performance anode materials for lithium ion and sodium ion batteries. ACS Sustain. Chem. Eng. 5(6), 4739-4745 (2017). https://doi.org/10.1021/acssuschemeng.7b00119
[34] Y.M. Lin, Z.Z. Qiu, D.Z. Li, S. Ullah, Y. Hai et al., NiS2@CoS2 nanocrystals encapsulated in N-doped carbon nanocubes for high performance lithium/sodium ion batteries. Energy Storage Mater. 11, 67-74 (2018). https://doi.org/10.1016/j.ensm.2017.06.001
[35] X. Ou, C.H. Yang, X.H. Xiong, F.H. Zheng, Q.C. Pan, C. Jin, M.L. Liu, K. Huang, A new rGO-overcoated Sb2Se3 nanorods anode for Na+ battery: in situ X-ray diffraction study on a live sodiation/desodiation process. Adv. Funct. Mater. 27(13), 1606242 (2017). https://doi.org/10.1002/adfm.201606242
[36] X. Wang, Y. Xiao, J.Q. Wang, L.N. Sun, M.H. Cao, Facile fabrication of molybdenum dioxide/nitrogen-doped graphene hybrid as high performance anode material for lithium ion batteries. J. Power Sources 274, 142-148 (2015). https://doi.org/10.1016/j.jpowsour.2014.10.031
[37] F.E. Niu, J. Yang, N.N. Wang, D.P. Zhang, W.L. Fan, J. Yang, Y.T. Qian, MoSe2-covered N,P-doped carbon nanosheets as a long-life and high-rate anode material for sodium-ion batteries. Adv. Funct. Mater. 27(23), 1700522 (2017). https://doi.org/10.1002/adfm.201700522
[38] Y.L. Xiao, X.M. Li, J.T. Zai, K.X. Wang, Y. Gong, B. Li, Q.Y. Han, X.F. Qian, CoFe2O4-graphene nanocomposites synthesized through an ultrasonic method with enhanced performances as anode materials for Li-ion batteries. Nano-Micro Lett. 6(4), 307-315 (2014). https://doi.org/10.1007/s40820-014-0003-7
[39] Y.L. Xiao, J.T. Zai, B.B. Tian, X.F. Qian, Formation of NiFe2O4/expanded graphite nanocomposites with superior lithium storage properties. Nano-Micro Lett. 9(3), 34 (2017). https://doi.org/10.1007/s40820-017-0127-7
[40] Y. Jiang, M. Wei, J.K. Feng, Y.C. Ma, S.L. Xiong, Enhancing the cycling stability of Na-ion batteries by bonding SnS2 ultrafine nanocrystals on amino-functionalized graphene hybrid nanosheets. Energy Environ. Sci. 9(4), 1430-1438 (2016). https://doi.org/10.1039/C5EE03262H
[41] Y. Zheng, T.F. Zhou, C.F. Zhang, J.F. Mao, H.K. Liu, Z.P. Guo, Boosted charge transfer in SnS/SnO2 heterostructures: toward high rate capability for sodium-ion batteries. Angew. Chem. Int. Ed. 55(10), 3408-3413 (2016). https://doi.org/10.1002/anie.201510978
[42] Y.X. Guo, L.F. Gan, C.S. Shang, E.K. Wang, J. Wang, A cake-style CoS2@MoS2/RGO hybrid catalyst for efficient hydrogen evolution. Adv. Funct. Mater. 27(5), 1602699 (2017). https://doi.org/10.1002/adfm.201602699
[43] Y.P. Zhu, T.Y. Ma, M. Jaroniec, S.Z. Qiao, Self-templating synthesis of hollow Co3O4 microtube arrays for highly efficient water electrolysis. Angew. Chem. 56(5), 1324-1328 (2017). https://doi.org/10.1002/anie.201610413
[44] X. Wang, H. Wang, Q. Li, H.S. Li, G.X. Zhao, H.L. Li, P.Z. Guo, S.D. Li, Y.K. Sun, Antimony selenide nanorods decorated on reduced graphene oxide with excellent electrochemical properties for Li-ion batteries. J. Electrochem. Soc. 164(13), A2922-A2929 (2017). https://doi.org/10.1149/2.0201713jes
[45] D.C. Higgins, F.M. Hassan, M.H. Seo, J.Y. Choi, M.A. Hoque, D.U. Lee, Z. Chen, Shape-controlled octahedral cobalt disulfide nanoparticles supported on nitrogen and sulfur-doped graphene/carbon nanotube composites for oxygen reduction in acidic electrolyte. J. Mater. Chem. A 3(12), 6340-6350 (2015). https://doi.org/10.1039/C4TA06667G
[46] W.N. Deng, X.H. Chen, Z. Liu, A.P. Hu, Q.L. Tang, Z. Li, Y.N. Xiong, Three-dimensional structure-based tin disulfide/vertically aligned carbon nanotube arrays composites as high-performance anode materials for lithium ion batteries. J. Power Sources 277, 131-138 (2015). https://doi.org/10.1016/j.jpowsour.2014.12.006
[47] Y.D. Ren, W.M. Lv, F.S. Wen, J.Y. Xiang, Z.Y. Liu, Microwave synthesis of SnS2 nanoflakes anchored graphene foam for flexible lithium-ion battery anodes with long cycling life. Mater. Lett. 174, 24-27 (2016). https://doi.org/10.1016/j.matlet.2016.03.075
[48] C.Z. Ma, J. Xu, J. Alvarado, B.H. Qu, J. Somerville, J.Y. Lee, Y.S. Meng, Investigating the energy storage mechanism of SnS2-rGO composite anode for advanced Na-ion batteries. Chem. Mater. 27(16), 5633-5640 (2015). https://doi.org/10.1021/acs.chemmater.5b01984
[49] H.Y. Sun, M. Ahmad, J. Luo, Y.Y. Shi, W.C. Shen, J. Zhu, SnS2 nanoflakes decorated multiwalled carbon nanotubes as high performance anode materials for lithium-ion batteries. Mater. Res. Bull. 49, 319-324 (2014). https://doi.org/10.1016/j.materresbull.2013.09.005
[50] Y.M. Wang, J.J. Wu, Y.F. Tang, X.J. Lu, C.Y. Yang, M.S. Qin, F.Q. Huang, X. Li, X. Zhang, Phase-controlled synthesis of cobalt sulfides for lithium ion batteries. ACS Appl. Mater. Interfaces 4(48), 4246-4250 (2012). https://doi.org/10.1021/am300951f
[51] X. Zhao, J.H. Sui, F. Li, H.T. Fang, H.E. Wang, J.Y. Li, W. Cai, G.Z. Cao, Lamellar MoSe2 nanosheets embedded with MoO2 nanoparticles: novel hybrid nanostructures promoted excellent performances for lithium ion batteries. Nanoscale 8(41), 17902-17910 (2016). https://doi.org/10.1039/C6NR05584B
[52] K. Zhang, M. Park, L.M. Zhou, G.H. Lee, W.J. Li, Y.M. Kang, J. Chen, Urchin-like CoSe2 as a high-performance anode material for sodium-ion batteries. Adv. Funct. Mater. 26(37), 6728-6735 (2016). https://doi.org/10.1002/adfm.201602608
[53] L.W. Ji, Z. Lin, M. Alcoutlabi, X.W. Zhang, Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries. Energy Environ. Sci. 4(8) 2682-2699 (2011). https://doi.org/10.1039/c0ee00699h
[54] K.Y. Xie, L. Li, X. Deng, W. Zhou, Z.P. Shao, A strongly coupled CoS2/reduced graphene oxide nanostructure as an anode material for efficient sodium-ion batteries. J. Alloys Compd. 726, 394-402 (2017). https://doi.org/10.1016/j.jallcom.2017.07.339
[55] Y.H. Zhang, N.N. Wang, C.H. Sun, Z.X. Lu, P. Xue, B. Tang, Z.C. Bai, S.X. Dou, 3D spongy CoS2 nanoparticles/carbon composite as high-performance anode material for lithium/sodium ion batteries. Chem. Eng. J. 332, 370-376 (2018). https://doi.org/10.1016/j.cej.2017.09.092
[56] Y.Z. Qin, Q. Li, J. Xu, X. Wang, G.X. Zhao et al., CoO-Co nanocomposite anode with enhanced electrochemical performance for lithium-ion batteries. Electrochim. Acta 224, 90-95 (2017). https://doi.org/10.1016/j.electacta.2016.12.040
[57] X.J. Liu, J.T. Zai, B. Li, J. Zou, Z.F. Ma, X.F. Qian, Na2Ge4O9 nanoparticles encapsulated in 3D carbon networks with long-term stability and superior rate capability in lithium ion batteries. J. Mater. Chem. A 4(27), 10552-10557 (2016). https://doi.org/10.1039/C6TA03085H
[58] X.M. Li, T.Y. Qian, J.T. Zai, K. He, Z.X. Feng, X.F. Qian, Co stabilized metallic 1Td MoS2 monolayers: bottom-up synthesis and enhanced capacitance with ultra-long cycling stability. Materials Today Energy 7, 10-17 (2018). https://doi.org/10.1016/j.mtener.2017.11.004
[59] X.M. Li, Z.X. Feng, J.T. Zai, Z.F. Ma, X.F. Qian, Incorporation of Co into MoS2/graphene nanocomposites: one effective way to enhance the cycling stability of Li/Na storage. J. Power Sources 373, 103-109 (2018). https://doi.org/10.1016/j.jpowsour.2017.10.094
[60] X.M. Li, J.T. Zai, S.J. Xiang, Y.Y. Liu, X.B. He, Z.Y. Xu, K.X. Wang, Z.F. Ma, X.F. Qian, Regeneration of metal sulfides in the delithiation process: the key to cyclic stability. Adv. Energy Mater. 6(19), 1601056 (2016). https://doi.org/10.1002/aenm.201601056

Citation Information

Xia Wang, Xueying Li, Qiang Li, Hongsen Li, Jie Xu, Hong Wang, Guoxia Zhao, Lisha Lu, Xiaoyu Lin, Hongliang Li, Shandong Li, Improved Electrochemical Performance Based on Nanostructured SnS2@CoS2-rGO Composite Anode for Sodium-Ion Batteries. Nano-Micro Lett.(2018) 10: 46. https://doi.org/10.1007/s40820-018-0200-x

History

Received: 13 March 2018 / Accepted: 2 April 2018


Additional Info

  • Type of Publishing: JOUR - Journal
  • Title: Improved Electrochemical Performance Based on Nanostructured SnS2@CoS2-rGO Composite Anode for Sodium-Ion Batteries
  • Author: Xia Wang, Xueying Li, Qiang Li, Hongsen Li, Jie Xu, Hong Wang, Guoxia Zhao, Lisha Lu, Xiaoyu Lin, Hongliang Li, Shandong Li
  • Year: 2018
  • Volume: 10
  • Issue: 3
  • Journal Name: Nano-Micro Letters
  • ISSN: 2150-5551
  • URL: http://dx.doi.org/10.1007/s40820-018-0200-x
  • Abstract: A promising anode material composed of SnS2@CoS2 flower-like spheres assembled from SnS2 nanosheets and CoS2 nanoparticles accompanied by reduced graphene oxide (rGO) was fabricated by a facile hydrothermal pathway. The presence of rGO and the combined merits of SnS2 and CoS2 endow the SnS2@CoS2-rGO composite with high conductivity pathways and channels for electrons and with excellent properties as an anode material for sodium-ion batteries (SIBs). A high capacity of 514.0 mAh g−1 at a current density of 200 mA g-1 after 100 cycles and a good rate capability can be delivered. The defined structure and good sodium-storage performance of the SnS2@CoS2-rGO composite demonstrate its promising application in high-performance sodium-ion batteries (SIBs).
  • Publish Date: Monday, 02 April 2018
  • Start Page: 46
  • DOI: 10.1007/s40820-018-0200-x