18November2018

Nano-Micro Letters

Formation of NiFe2O4/Expanded Graphite Nanocomposites with Superior Lithium Storage Properties

View ResearcherID and ORCID

Yinglin Xiao1,2, Jiantao Zai2, Bingbing Tian1,3,* and Xuefeng Qian2,*

Abstract
icon-htmlFull Text Html
icon-pdf-smPDF w/ Links
icon-citExport Citation
Figures
+Show more

Nano-Micro Letters (2017) 9: 34

First Online: January 9, 2017 (Article)

DOI:10.1007/s40820-017-0127-7

*Corresponding author. E-mail: chmt@nus.edu.sg, xfqian@sjtu.edu.cn

 

Abstract

 


Fig. 1 Schematic illustration of possible formation mechanism of NiFe2O4/EG nanocomposite
A NiFe2O4/expanded graphite (NiFe2O4/EG) nanocomposite was prepared via a simple and inexpensive synthesis method. Its lithium storage properties were studied with the goal of applying it as an anode in a lithium-ion battery. The obtained nanocomposite exhibited a good cycle performance, with a capacity of 601 mAh g-1 at a current of 1 A g-1 after 800 cycles. This good performance may be attributed to the enhanced electrical conductivity and layered structure of the EG. Its high mechanical strength could postpone the disintegration of the nanocomposite structure, efficiently accommodate volume changes in the NiFe2O4-based anodes, and alleviate aggregation of NiFe2O4 nanoparticles.

 

Keywords

NiFe2O4; Expanded graphite; Anode materials; Lithium-ion batteries

 

Full Text Html

1 Introduction

    To meet the demands of high-energy storage for practical applications in electric vehicles (EVs) and hybrid electric vehicles (HEVs), much attention has paid to lithium ion batteries (LIBs) because of their distinct advantages, e.g., their large specific capacity, high energy density, long cycle life and environmental friendliness[1-3] Today, there is a great demand to design and develop novel and high-performance electrode materials to achieve LIBs with higher energy density, longer cycle life, improved safety, and lower cost. However, it is still urgency to improve the reversible charge capacity of anode materials in commercial LIBs, i.e., graphite [4-5]. Among various anode materials with higher specific capacities than that of the material used in commercial batteries, ternary compounds (e.g., CuFe2O4 [6, 7], ZnFe2O4 [8, 9], CoFe2O4 [10-12], Zn2SnO4 [9, 13], ZnMn2O4 [14-17]) have been considered promising candidates because of their high theoretical capacities, low cost, and safety [9]. Nevertheless, their poor electrical conductivities and huge volume changes during continuous charge/discharge processes would lead to electrode pulverization. Rapid disintegration of these electrode materials caused by induced mechanical stress is responsible for a decrease in the capacity upon cycling and further hinders their practical applications [18, 19]. Expanded graphite (EG) possesses many advantageous properties, including fewer functional groups, better conductivity, higher mechanical strength[20], and lower cost [21]. A layered NiFe2O4/EG composite structure can be fabricated by incorporating nanostructured NiFe2O4 material with EG. This provides outstanding electron conductivity [22-25] and an ideal solution to the aforementioned inherent drawbacks of ternary compounds. However, to the best of our knowledge, there have been few reports on the construction of nanostructured material/EG composites with superior lithium storage properties because it is a challenge to homogenously disperse nanostructured materials into EG nanosheets.
In this work, a NiFe2O4/EG nanocomposite was easily fabricated via a grinding and mixing process, followed by annealing at a high temperature. This NiFe2O4/EG nanocomposite showed superior lithium storage properties, with a capacity of 601 mAh g-1 at a current density of 1 A g-1 after 800 cycles. In general, the combination of several structural features of the NiFe2O4/EG nanocomposite may contribute to the enhanced capacity and cycling performance. First, the layered structure of the NiFe2O4/EG nanocomposite can alleviate agglomeration of materials and improve the cycling performance. Second, the higher mechanical strength of EG can postpone disintegration of the nanocomposite structure. Third, EG can provide an enhanced conductivity performance, which is critical for the lithium storage performance. Fourth, EG has a high reversible capacity and good cycling performance, which can assist in enhancing the capacity and cycling performance of NiFe2O4/EG Nanocomposite.

2 Experimental

2.1 Synthesis of NiFe2O4 and NiFe2O4/EG Nanocomposites

NiFe2O4 was synthesized using the procedure reported in a previous paper [26]. Typically, 1 mmol of nickel chloride hexahydrate (NiCl2×6H2O), 2 mmol of ferric chloride hexahydrate (FeCl3×6H2O), and 3 mL of ammonia were dissolved in 37 mL of alcohol. The mixture was sonicated for 30 min, transferred to a Teflon-lined autoclave, and then maintained at 180 °C for 12 h. The final product was separated by centrifugation and dried at 60 °C.

The NiFe2O4/EG nanocomposite was synthesized using the following procedure: 0.5 g of NiFe2O4, 0.2 g of expandable graphite, and 5 mL of alcohol were mixed and ground until the alcohol was completely volatilized. After that, the mixture was annealed at 1000 °C for 5 min in an Ar atmosphere, and the final product was ground and used as the active material for lithium ion batteries.

2.2 Characterizations

The crystal structures of the powder samples were characterized using X-ray diffraction (XRD, Shimadzu XRD-6000, CuKα, 40 kV, 30 mA, 20° ≤ 2θ ≤ 70°). A thermogravimetric (TG) analysis was performed on a Perkin-Elmer 7 instrument to determine the weight ratio of EG to NiFe2O4. The morphology of each sample was studied using a transmission electron microscopy (TEM) system (JEOL, JEM-2100).

2.3 Electrochemical Testing

The working electrodes were fabricated from a slurry containing 80% active material, 10% polymer binder (polyvinylidene difluoride, PVDF), and 10% acetylene black on a copper foil using the procedure outlined in previous work [27] and dried in a vacuum oven at 80 °C for 12 h. The electrochemical performances were determined using a LAND battery tester (CT2001A model, Wuhan Jinnuo Electronics, Ltd.) between 0.01 and 3 V versus Li+/Li. All of the tests were performed at room temperature, with an electrolyte composed of 1 mol L-1 of LiPF6 in a mixed solvent of ethylene carbonate (EC)/diethylene carbonate (DEC) (1:1 vol%) and a Li cathode placed in the cell. Cyclic voltammetry measurements were performed using a CHI 660C potentiostat between 0.01 and 3 V at a scan speed of 0.5 mV s-1. A frequency range of 10 kHz to 0.1 Hz was used for electrochemical impedance spectroscopy (EIS) at an open circuit potential with an alternating spectrum (AC) perturbation of 10 mV on a zennium electrochemistry workstation.

3 Results and Discussion

The synthesis procedure is schematically depicted in Fig. 1. In the first step, NiFe2O4 is homogenously dispersed onto the surface of the EG after the grinding process. After the calcination process, a mixture of thermal EG nanosheets and NiFe2O4­ is obtained. Finally, NiFe2O4 is homogenously dispersed onto the surface of the EG nanosheets during the grinding process, producing the desired NiFe2O4/EG nanocomposites.

Fig. 1 Schematic illustration of possible formation mechanism of NiFe2O4/EG nanocomposite

Fig. 1 Schematic illustration of possible formation mechanism of NiFe2O4/EG nanocomposite

The XRD pattern of NiFe2O4 in Fig. 2a shows that all of the diffraction peaks can be readily indexed to cubic NiFe2O4 (JCPDS card no. 227, space group: Fd-3m, a = 8.33790 Å). One additional diffraction peak located at approximately 26.2° in the XRD pattern of NiFe2O4/EG suggests the presence of EG. No other additional peaks are observed in the XRD patterns, suggesting high purity of the obtained products. The weight ratio of EG in the NiFe2O4/EG nanocomposite was evaluated using TGA in air (Fig. 2b). Assuming that the final residue was NiFe2O4, the lost weight of NiFe2O4/EG may correspond to the oxidation of EG to CO2. Based on the lost weight values of the NiFe2O4 and NiFe2O4/EG nanocomposites, the weight percentage of EG in the NiFe2O4/EG was approximately 14%.

Fig. 2 a XRD patterns and b TGA results for NiFe2O4 and NiFe2O4/EG

Fig. 2 a XRD patterns and b TGA results for NiFe2O4 and NiFe2O4/EG

The morphologies and structures of the as-prepared NiFe2O4 and NiFe2O4/EG nanocomposites were studied using TEM. It was found that the size of the as-prepared NiFe2O4 was approximately 20 nm (Fig. 3a); NiFe2O4 was homogenously dispersed into the paper-like EG nanosheets in the NiFe2O4/EG nanocomposite (Fig. 3b). Furthermore, the structural characteristics of a typical NiFe2O4 nanoparticle with visible lattice fringes were observed in the HRTEM image (Fig. 3c). Inter-planar distances of 0.294 and 0.240 nm were measured, which were consistent with the (220) and (222) crystal planes of the cubic NiFe2O4 phase, respectively, confirming the crystalline structure of the obtained NiFe2O4.

Fig. 3 TEM images of a NiFe2O4 and b NiFe2O4/EG and HRTEM image of NiFe2O4

Fig. 3 TEM images of a NiFe2O4 and b NiFe2O4/EG and HRTEM image of NiFe2O4

The lithium storage properties of the NiFe2O4/EG nanocomposite as an anode material for LIBs were studied using CV between 0 and 3.0 V vs. Li/Li+ at a scan rate of 0.0005 V s-1 (Fig. 4). In the 1st CV cycle, the broad cathodic peak located at approximately 0.40 V could be attributed to the reduction reactions of Ni2+ to Ni0 and/or Fe3+ to Fe0. It is known that the first discharge plateaus of NiO and Fe2O3 are usually located at 0.26 and 0.55, respectively [28, 29]. Thus, the reduction peaks of NiFe2O4 could have overlapped to form a broad cathodic peak at 0.45 under our experimental conditions. This cathodic peak shifted to ~0.80 V in the 2nd and subsequent cycles, corresponding to a lower polarization of the electrodes induced by the first lithiation/delithiation process. This process can be expressed by the following reaction:

NiFe2O4 + 8Li+ + 8e- → Ni + 2Fe + 4Li2O (1)

The anodic peak located at 1.75 V in the 1st CV cycle may correspond to the oxidation of metallic Fe and Ni, and this anodic peak shifts to 1.90 V in subsequent cycles because of the polarization of the electrodes [3, 30]. This process can be expressed by the following reactions:

Ni + Li2O → NiO +2Li+ + 2e- (2)
2Fe + 3Li2O → Fe2O3 + 6Li+ +6e- (3)

The reversible cathodic and anodic peaks located at approximately 0.80 and 1.90 V, respectively, in the 2nd and subsequent cycles indicate a reversible oxidation/reduction reaction in the charge/discharge processes. To summarize, the reaction should be as follows:

Ni + 2Fe + 4Li2O ↔ NiO + Fe2O3 +8Li+ + 8e- (4)

Moreover, the observed small cathodic peaks at 0.1 V and anodic peaks located at 0.25 V may correspond to the reversible polymerization/oligomerization of carbonates and alkyl carbonates (the main components of the solid state electrolyte interface), which would further lead to a reversible polymeric/gel film on the nanocomposite [31, 32].

Fig. 4 Cyclic voltammograms of NiFe2O4/EG nanocomposites for first five cycles between 3.00 and 0.01 V vs. Li, with scan rate of 0.5 mV s-1

Fig. 4 Cyclic voltammograms of NiFe2O4/EG nanocomposites for first five cycles between 3.00 and 0.01 V vs. Li, with scan rate of 0.5 mV s-1

The discharge–charge voltage profiles of the NiFe2O4/EG nanocomposite at a current density of 0.1 A g-1 are shown in Fig. 5a. The electrode based on NiFe2O4/EG had only one discharge platform, located at 0.75 V, which is attributed to the reduction reaction of NiFe2O4 with lithium during the first discharge process and is also associated with the formation of a solid state electrolyte interface (SEI) [4]. The plateau increased to ~1.0 V in the subsequent cycles, in agreement with the galvanostatic discharge–charge data [33]. After the 10th cycle, the plateau at approximately 1.0 V had evolved into a slope, which may have been caused by Li+ trapping in the electrode during cycling [34]. The fact that the specific capacity was greater than 0.75 V in the first cycle and greater than 1.0 V in the subsequent cycles could be ascribed to the faradic capacitance on the surface or edge site of the EG. A similar phenomenon can be found in graphene nanosheets [35]. The fact that the capacity was less than 0.75 V in the first cycle and less than 1.0 V in subsequent cycles was mainly associated with the conversion/deconversion process of the binary oxide and the formation of the SEI layer [36]. The excellent mechanical property of EG can postpone the disintegration of the nanocomposite structure during the discharge–charge processes, and leads to a good cycle performance [37, 38].

Fig. 5 a Charge–discharge curves of NiFe2O4/EG at 0.1 A g-1, b cycling performances of NiFe2O4 and NiFe2O4/EG at current density of 1 A g-1, c cycling performance of NiFe2O4/EG at current density of 0.1 A g-1, and d rate capability of NiFe2O4/EG

Fig. 5 a Charge–discharge curves of NiFe2O4/EG at 0.1 A g-1, b cycling performances of NiFe2O4 and NiFe2O4/EG at current density of 1 A g-1, c cycling performance of NiFe2O4/EG at current density of 0.1 A g-1, and d rate capability of NiFe2O4/EG

Figure 5b shows the cyclic performances of NiFe2O4 and NiFe2O4/EG at a current density of 1 A g-1. A discharge capacity of 986 mAh g-1 and a charge capacity of 741 mAh g-1 in the 1st cycle were observed on the NiFe2O4/EG electrode. The large initial irreversible discharge capacity could be attributed to the formation of the SEI. The capacities continued to decrease until the 50th cycle. This capacity decrease was partially ascribed to the decomposition of the electrolyte [39], along with the incompletely reversible reaction of the NiFe2O4/EG nanocomposite. It is interesting to note that after the 100th cycle, the reversible capacities significantly increased with the further activation of NiFe2O4, which was also observed in earlier work [40]. Furthermore, the reversible capacities of the NiFe2O4/EG continued to increase from 443 mAh g-1 in the 450th cycle to 601 mAh g-1 in the 800th cycle. These increasing capacities can be attributed to the reversible polymeric/gel film on the nanocomposite. A similar phenomenon has been observed in other transition metal oxides [37, 41]. The cyclic stability of the NiFe2O4/EG nanocomposite electrode was better than those reported in previous papers [42-43]. The results indicated that the excellent mechanical properties of the EG contributed to the cyclic stability of the obtained NiFe2O4/EG composite.

The cycling performance of the NiFe2O4/EG at a current density of 0.1 A g-1 up to 120 cycles is shown in Fig. 5c. The initial discharge capacity (1182 mAh g-1) was much higher than the charge capacity (790 mAh g-1), with a high irreversible capacity (a Coulombic efficiency of 66.8%) related to the formation of an SEI layer and a non-fully reversible conversion/deconversion process in the first lithiation/delithiation cycle. In subsequent cycles, the discharge and charge capacities were almost equal, with a Coulombic efficiency of 100%, which indicated excellent electrochemical reversibility. The capacity decreased slightly from the 2nd to 20th cycle because of the non-fully reversible conversion/deconversion process, and then slowly increased from the 21st to 120th cycle because of the reactivation of the NiFe2O4. The NiFe2O4/EG electrode material was collected after the 120th discharge–charge process and further analyzed using TEM (Fig. 6). The TEM image showed that the EG in the NiFe2O4-EG still had a layered structure and there was no agglomeration of NiFe2O4 nanoparticles, which was responsible for the good stability of the electrode. To further evaluate the stability of the NiFe2O4/EG nanocomposite, the rate capability was investigated at different rates from 0.1 to 2 A g-1 (Fig. 5d). The electrode had charge capacities of 824, 667, 529, and 445 mAh g-1 at current densities of 0.1, 0.2, 0.5, and 1.0 A g-1, respectively. Furthermore, at a current density of 2.0 A g-1, the NiFe2O4/EG electrode had a stable charge capacity of 361 mAh g-1, indicating that the obtained NiFe2O4/EG nanocomposite exhibited a remarkable high lithium storage capacity at a high rate.

Fig. 6 TEM images of NiFe2O4/EG nanocomposite after 120 discharge–charge processes

Fig. 6 TEM images of NiFe2O4/EG nanocomposite after 120 discharge–charge processes

To further investigate the effects of the EG in the NiFe2O4/EG nanocomposite, the conductivities of NiFe2O4 and NiFe2O4/EG after five discharge–charge cycles were evaluated using EIS measurements (Fig. 7). As widely discussed in EIS studies of intercalation/deintercalation-type materials, the semicircle in the medium-frequency region is assigned to the charge–transfer impedance, which is related to the electrochemical reaction between the electrolyte and electrode [44, 6]. In the plots for NiFe2O4 and its nanocomposite, the semicircle for the NiFe2O4/EG nanocomposite is smaller than that of NiFe2O4, indicating that the EG could facilitate the electron transfer between the electrolyte and NiFe2O4 and further improve the rate capability [45].

Fig. 7 Nyquist plots of NiFe2O4 and NiFe2O4/EG at 0.08 V vs. Li after five cycles

Fig. 7 Nyquist plots of NiFe2O4 and NiFe2O4/EG at 0.08 V vs. Li after five cycles

Based on the above discussion, the advantage of the NiFe2O4/EG nanocomposite involves its unique structural and electrochemical nature. First, the layered structure of the NiFe2O4/EG nanocomposite can alleviate the agglomeration of materials and improve the cycling performance. Second, EG has fewer functional groups and excellent mechanical properties, which can maintain the structure stability and postpone the disintegration of the nanocomposite structure during the discharge–charge processes, leading to a good cycle performance. Third, the high electrical conductivity of EG can increase the conductivity of the electrodes, ensuring fast electron transportation. Finally, EG has a high reversible capacity and good cycle performance, which is conducive to enhancing the capacity and cycling performance[46].

4 Conclusions

We developed a simple method for the direct homogeneous dispersion of NiFe2O4 nanoparticles onto EG nanosheets for use as a superior anode material for lithium-ion batteries. This hybrid nanostructure showed improved electrical conductivity, maintained structure stability, and exhibited delayed disintegration during the discharge–charge processes, which led to a good cycle performance. As a result, the fabricated NiFe2O4/EG composite demonstrated a high reversible capacity of 601 mAh g-1 over 800 cycles at a current density of 1 A g-1. Our synthesis approach could easily be extended to combine other ternary compounds (MFe2O4, MCo2O4, MMn2O4, etc.) with EG, offering promising routes for the low-cost mass production of advanced electrode materials for the next generation of LIBs.

Acknowledgments

The authors acknowledgment support from the National Basic Research Program of China (2014CB239702). National Natural Science Foundation of China (Grant No. 21371121, 21506126 and 51502174) and Shenzhen Science and Technology Research Foundation (Grant No. JCYJ20150324141711645JCYJ20150324141711616 and JCYJ20150626090504916), China Postdoctoral Science Foundation (2015 M582401 and 2015 M572349).

References

[1]D. Wu, Z. Guo, X. Yin, Q. Pang, B. Tu, L. Zhang, Y.G. Wang, Q. Li, Metal-organic frameworks as cathode materials for Li-O2 batteries. Adv. Mater. 26(20), 3258-3262 (2014). doi:10.1002/adma.201305492
[2]G. Xu, B. Ding, J. Pan, P. Nie, L. Shen, X. Zhang, High performance lithium-sulfur batteries: advances and challenges. J. Mater. Chem. A 2(32), 12662-12676 (2014). doi:10.1039/C4TA02097A
[3]H. Liao, H. Ding, B. Li, X. Ai, C. Wang, Covalent-organic frameworks: potential host materials for sulfur impregnation in lithium–sulfur batteries. J. Mater. Chem. A 2(23), 8854-8458 (2014). doi:10.1039/c4ta00523f
[4]Y. Sun, J. Zhang, T. Huang, Z. Liu, A. Yu, Fe2O3 CNTs composites as anode materials for lithium-ion batteries. Int. J. Electrochem. Sci. 8(2), 2919-2931 (2013).
[5]Y. Liu, X. Zhao, F. Li, D. Xia, Facile synthesis of MnO/C anode materials for lithium-ion batteries. Electrochim. Acta 56(18), 6448-6452 (2011). doi:10.1016/j.electacta.2011.04.133
[6]S. Peng, L. Li, M. Srinivasan, Electrospun CuFe2O4 nanotubes as anodes for high-performance lithium-ion batteries. J. Energy Chem. 23(3), 301-307 (2014). doi:10.1016/S2095-4956(14)60151-0
[7]L. Luo, R. Cui, H. Qiao, K. Chen, Y. Fei, D. Li, Z. Pang, K. Liu, Q. Wei, High lithium electroactivity of electrospun CuFe2O4 nanofibers as anode material for lithium-ion batteries. Electrochim. Acta 144, 85-91 (2014). doi:10.1016/j.electacta.2014.08.048
[8]J. Shi, X. Zhou, Y. Liu, Q. Su, J. Zhang, G. Du, One-pot solvothermal synthesis of ZnFe2O4 nanospheres/graphene composites with improved lithium-storage performance. Mater. Res. Bull. 65, 204-209 (2015). doi:10.1016/j.materresbull.2015.01.057
[9]Y. Dong, Y. Xia, Y.S. Chui, C. Cao, J.A. Zapien, Self-assembled three-dimensional mesoporous ZnFe2O4-graphene composites for lithium ion batteries with significantly enhanced rate capability and cycling stability. J. Power Sources 275, 769-776 (2015). doi:10.1016/j.jpowsour.2014.11.005
[10]X. Liu, N. Wu, C. Cui, P. Zhou, Y. Sun, Enhanced rate capability and cycling stability of core/shell structured CoFe2O4/onion-like C nanocapsules for lithium-ion battery anodes. J. Alloys Compd. 644, 59-65 (2015). doi:10.1016/j.jallcom.2015.04.097
[11]X. Zhang, Y. Xie, Y. Sun, Q. Zhang, Q. Zhu, D. Hou, J. Guo, Self-template synthesis of CoFe2O4 nanotubes for high-performance lithium storage. RSC Adv. 5(38), 29837-29841 (2015).doi:10.1039/c5ra00428d
[12]J. Guo, X. Zhang, Y. Sun, X. Zhang, Mesoporous CoFe2O4 octahedra with high-capacity and long-life lithium storage properties. RSC Adv. 6(1), 18-22 (2016). doi:10.1039/c5ra21311h
[13]S. Hu, Y. Song, S. Yuan, H. Liu, Q. Xu, Y. Wang, C- X. Wang, Y- Y. Xia, A hierarchical structure of carbon-coated Li3VO4 nanoparticles embedded in expanded graphite for high performance lithium ion battery. J. Power Sources 303, 333-339 (2016). doi:10.1016/j.jpowsour.2015.11.015
[14]J. Guo, H. Zhu, Y. Sun, L. Tang, X. Zhang, Flexible foams of graphene entrapped SnO2-Co3O4 nanocubes with remarkably large and fast lithium storage. J. Mater. Chem. A 4, 16101-16107 (2016). doi:10.1039/C6TA06626G
[15]T. Jiang, X. Tian, H. Gu, H. Zhu, Y. Zhou, Zn2SnO4@C core–shell nanorods with enhanced anodic performance for lithium-ion batteries. J. Alloys Compd. 639, 239-243 (2015). doi:10.1016/j.jallcom.2015.03.172
[16]C. Yuan, L. Zhang, L. Hou, L. Zhou, G. Pang, L. Lian, Scalable room-temperature synthesis of mesoporous nanocrystalline ZnMn2O4 with enhanced lithium storage properties for lithium-ion batteries. Chem. Eur. J. 21(3), 1262-1268 (2015). doi:10.1002/chem.201404624
[17]D. Cai, D. Wang, H. Huang, X. Duan, B. Liu, L. Wang, Y. Liu, Q. Li, T. Wang, Rational synthesis of ZnMn2O4 porous spheres and graphene nanocomposite with enhanced performance for lithium-ion batteries. J. Mater. Chem. A 3(21), 11430-11436 (2015). doi:10.1039/C5TA00539F
[18]Y. Sun, X. Hu, W. Luo, F. Xia, Y. Huang, Reconstruction of conformal nanoscale MnO on graphene as a high-capacity and long-life anode material for lithium ion batteries. Adv. Funct. Mater. 23(19), 2436-2444 (2013). doi:10.1002/adfm.201202623
[19]H. Xia, D. Zhu, Y. Fu, X. Wang, CoFe2O4-graphene nanocomposite as a high-capacity anode material for lithium-ion batteries. Electrochimi. Acta 3, 166-174 (2012). doi:10.1016/j.electacta.2012.08.027
[20]Y.S. Yang, C.Y. Wang, M.M. Chen, Z.Q. Shi, J.M. Zheng, Facile synthesis of mesophase pitch/exfoliated graphite nanoplatelets nanocomposite and its application as anode materials for lithium-ion batteries. J. Solid State Chem. 183(9), 2116-2120 (2010). doi:10.1016/j.jssc.2010.07.011
[21]C. Ma, C. Ma, J. Wang, H. Wang, J. Shi, Y. Song, Q. Guo, L. Liu, Exfoliated graphite as a flexible and conductive support for Si-based Li-ion battery anodes. Carbon 72, 38-46 (2014). doi:10.1016/j.carbon.2014.01.027
[22]Y.X. Wang, L. Huang, L.C. Sun, S.Y. Xie, G.L. Xu et al., Facile synthesis of a interleaved expanded graphite-embedded sulphur nanocomposite as cathode of Li–S batteries with excellent lithium storage performance. J. Mater. Chem. 22(11), 4744-4750 (2012). doi:10.1039/c2jm15041g
[23]Y. Zhao, C. Ma, Y. Li, H. Chen, Z. Shao, Self-adhesive Co3O4/expanded graphite paper as high-performance flexible anode for Li-ion batteries. Carbon 95, 494-496 (2015). doi:10.1016/j.carbon.2015.08.053
[24]D. Zhao, L. Wang, P. Yu, L. Zhao, C. Tian, W. Zhou, L. Zhang, H. Fu, From graphite to porous graphene-like nanosheets for high rate lithium-ion batteries. Nano Res. 8(9), 2998-3010 (2015). doi:10.1007/s12274-015-0805-z
[25]Y. Zhao, C. Ma, C. Ma, J. Shi, J. shi, Facile solution-free preparation of a carbon coated Fe3O4 nanoparticles/expanded graphite composite with outstanding Li-storage performances. Mater. Lett. 177, 148-151 (2016). doi:10.1016/j.matlet.2016.04.049
[26]Y. Xiao, J. Zai, X. Li, Y. Gong, B. Li, Q. Han, X. Qian, Polydopamine functionalized graphene/NiFe2O4 nanocomposite with improving Li storage performances. Nano Energy 6, 51-58 (2014). doi:10.1016/j.nanoen.2014.03.006
[27]J. Zhu, T. Zhu, X. Zhou, Y. Zhang, X.W. Lou, X. Chen, H. Zhang, H.H. Hng, Q. Yan, Facile synthesis of metal oxide/reduced graphene oxide hybrids with high lithium storage capacity and stable cyclability. Nanoscale 3(3), 1084-1089 (2011). doi:10.1039/C0NR00744G
[28]G. Zhou, J. Ma, L. Chen, Selective carbon coating techniques for improving electrochemical properties of NiO nanosheets. Electrochim. Acta 133, 93-99 (2014). doi:10.1016/j.electacta.2014.03.161
[29]Y. Zhao, Z. Feng, Z. J. Xu, Yolk-shell Fe2O3 odot C composites anchored on MWNTs with enhanced lithium and sodium storage. Nanoscale 7(21), 9520-9525 (2015). doi:10.1039/C5NR01281C
[30]Z. Li, H. Wang, Z. Sun, J. Su, Z. Wang, L. Wang, Self-activated continuous pulverization film: an insight into the mechanism of the extraordinary long-life cyclability of hexagonal H4.5Mo5.25O18·(H2O)1.36 microrods. J. Mater. Chem. A 4(1), 303-313 (2016). doi:10.1039/C5TA07314F
[31]Y. Xiao, X. Li, J. Zai, K. Wang, Y. Gong, B. Li, Q. Han, X. Qian, CoFe2O4-Graphene Nanocomposites Synthesized through An Ultrasonic Method with Enhanced Performances as Anode Materials for Li-ion Batteries. Nano-Micro Lett. 6(4), 307-315 (2014). doi:10.1007/s40820-014-0003-7
[32]S. Yang, H. Song, X. Chen, Electrochemical performance of expanded mesocarbon microbeads as anode material for lithium-ion batteries. Electrochem. commun. 8(1), 137-142 (2006). doi:10.1016/j.elecom.2005.10.035
[33]Y. Fu, Y. Wan, H. Xia, X. Wang, Nickel ferrite–graphene heteroarchitectures: Toward high-performance anode materials for lithium-ion batteries. J. Power Sources 213, 338-342 (2012). doi:10.1016/j.jpowsour.2012.04.039
[34]B. Tian, J. Swiatowska, V. Maurice, S. Zanna, A. Seyeux, L.H. Klein, P. Marcus, Aging-induced chemical and morphological modifications of thin film iron oxide electrodes for lithium-ion batteries. Langmuir 30(12), 3538-3547 (2014). doi:10.1021/la404525v
[35]G. Wang, X. Shen, J. Yao, J. Park, Graphene nanosheets for enhanced lithium storage in lithium ion batteries. Carbon 47, 2049-2053 (2009). doi:10.1016/j.carbon.2009.03.053
[36]Y. Wu, Y. Wei, J. Wang, K. Jiang, S. Fan, Conformal Fe3O4 sheath on aligned carbon nanotube scaffolds as high-performance anodes for lithium ion batteries. Nano lett. 13(2), 818-823 (2013). doi:10.1021/nl3046409
[37]G. Zhou, D.W. Wang, F. Li, L. Zhang, N. Li, Z. S. Wu, L. Wen, G.Q. Lu, H.M. Cheng, Graphene-wrapped Fe3O4 anode material with improved reversible capacity and cyclic stability for lithium ion batteries. Chem. Mater. 22(18), 5306-5313 (2010). doi:10.1021/cm101532x
[38]P. Zhu, S. Liu, J. Xie, S. Zhang, G. Cao, X. Zhao, Facile synthesis of NiFe2O4/reduced graphene oxide hybrid with enhanced electrochemical lithium storage performance. J. Mater. Sci. Technol. 30(11), 1078-1083 (2014). doi:10.1016/j.jmst.2014.08.009
[39]L. Wu, Q. Xiao, Z. Li, G. Lei, P. Zhang, L. Wang, CoFe2O4/C composite fibers as anode materials for lithium-ion batteries with stable and high electrochemical performance. Solid State Ionics 215, 24-28 (2012). doi:10.1016/j.ssi.2012.03.044
[40]L. Tao, J. Zai, K. Wang, Y. Wan, H. Zhang, C. Yu, Y. Xiao, X. Qian, 3D-hierarchical NiO-graphene nanosheet composites as anodes for lithium ion batteries with improved reversible capacity and cycle stability. RSC Adv. 2(8), 3410-3415 (2012). doi:10.1039/c2ra00963c
[41]S. Laruelle, S. Grugeon, P. Poizot, M. Dolle, L. Dupont, J. Tarascon, on the origin of the extra electrochemical capacity displayed by MO/Li cells at low potential. J. Electrochem. Soc. 149(5), A627-A634 (2002). doi:10.1149/1.1467947
[42]P.Preetham, S. Mohapatra, S. Nair, D. Santhanagopalan, A.K. Rai, Ultrafast pyro-synthesis of NiFe2O4 nanoparticles within a full carbon network as a high-rate and cycle-stable anode material for lithium ion. RCS Adv. 6(44), 38064-38070 (2016). doi:10.1039/c6ra03670h
[43]J. Wang, G. Yang, L. Wang, W. Yan, Synthesis of one-dimensional NiFe2O4 nanostructures: tunable morphology and high-performance anode materials for Li ion batteries. J. Mater. Chem. A 4(22), 8620-8629 (2016). doi:10.1039/C6TA02655A
[44]T. Wei, F. Wang, J. Yan, J. Cheng, Z. Fan, H. Song, Microspheres composed of multilayer graphene as anode material for lithium-ion batteries. J. Electroanaly. Chem. 653(1-2), 45-49 (2011). doi: 10.1016/j.jelechem.2011.01.010
[45]C.M. Chen, J.Q. Huang, Q. Zhang, W.Z. Gong, Q.H. Yang, M. Wang, Y. Yang, Annealing a graphene oxide film to produce a free standing high conductive graphene film. Cabon 50(2), 659-667 (2012). doi:10.1016/j.carbon.2011.09.022
[46] L. Bai, D. Zhao, T. Zhang, W. Xie, J. Zhang, A comparative study of electrochemical performance of graphene sheets, expanded graphite and natural graphite as anode materials for lithium-ion batteries. Electrochim. Acta 107, 555-561 (2013). doi:10.1016/j.electacta.2013.06.032

References

[1]D. Wu, Z. Guo, X. Yin, Q. Pang, B. Tu, L. Zhang, Y.G. Wang, Q. Li, Metal-organic frameworks as cathode materials for Li-O2 batteries. Adv. Mater. 26(20), 3258-3262 (2014). doi:10.1002/adma.201305492
[2]G. Xu, B. Ding, J. Pan, P. Nie, L. Shen, X. Zhang, High performance lithium-sulfur batteries: advances and challenges. J. Mater. Chem. A 2(32), 12662-12676 (2014). doi:10.1039/C4TA02097A
[3]H. Liao, H. Ding, B. Li, X. Ai, C. Wang, Covalent-organic frameworks: potential host materials for sulfur impregnation in lithium–sulfur batteries. J. Mater. Chem. A 2(23), 8854-8458 (2014). doi:10.1039/c4ta00523f
[4]Y. Sun, J. Zhang, T. Huang, Z. Liu, A. Yu, Fe2O3 CNTs composites as anode materials for lithium-ion batteries. Int. J. Electrochem. Sci. 8(2), 2919-2931 (2013).
[5]Y. Liu, X. Zhao, F. Li, D. Xia, Facile synthesis of MnO/C anode materials for lithium-ion batteries. Electrochim. Acta 56(18), 6448-6452 (2011). doi:10.1016/j.electacta.2011.04.133
[6]S. Peng, L. Li, M. Srinivasan, Electrospun CuFe2O4 nanotubes as anodes for high-performance lithium-ion batteries. J. Energy Chem. 23(3), 301-307 (2014). doi:10.1016/S2095-4956(14)60151-0
[7]L. Luo, R. Cui, H. Qiao, K. Chen, Y. Fei, D. Li, Z. Pang, K. Liu, Q. Wei, High lithium electroactivity of electrospun CuFe2O4 nanofibers as anode material for lithium-ion batteries. Electrochim. Acta 144, 85-91 (2014). doi:10.1016/j.electacta.2014.08.048
[8]J. Shi, X. Zhou, Y. Liu, Q. Su, J. Zhang, G. Du, One-pot solvothermal synthesis of ZnFe2O4 nanospheres/graphene composites with improved lithium-storage performance. Mater. Res. Bull. 65, 204-209 (2015). doi:10.1016/j.materresbull.2015.01.057
[9]Y. Dong, Y. Xia, Y.S. Chui, C. Cao, J.A. Zapien, Self-assembled three-dimensional mesoporous ZnFe2O4-graphene composites for lithium ion batteries with significantly enhanced rate capability and cycling stability. J. Power Sources 275, 769-776 (2015). doi:10.1016/j.jpowsour.2014.11.005
[10] X. Liu, N. Wu, C. Cui, P. Zhou, Y. Sun, Enhanced rate capability and cycling stability of core/shell structured CoFe2O4/onion-like C nanocapsules for lithium-ion battery anodes. J. Alloys Compd. 644, 59-65 (2015). doi:10.1016/j.jallcom.2015.04.097
[11] X. Zhang, Y. Xie, Y. Sun, Q. Zhang, Q. Zhu, D. Hou, J. Guo, Self-template synthesis of CoFe2O4 nanotubes for high-performance lithium storage. RSC Adv. 5(38), 29837-29841 (2015). doi:10.1039/c5ra00428d
[12] J. Guo, X. Zhang, Y. Sun, X. Zhang, Mesoporous CoFe2O4 octahedra with high-capacity and long-life lithium storage properties. RSC Adv. 6(1), 18-22 (2016). doi:10.1039/c5ra21311h
[13] S. Hu, Y. Song, S. Yuan, H. Liu, Q. Xu, Y. Wang, C- X. Wang, Y- Y. Xia, A hierarchical structure of carbon-coated Li3VO4 nanoparticles embedded in expanded graphite for high performance lithium ion battery. J. Power Sources 303, 333-339 (2016). doi:10.1016/j.jpowsour.2015.11.015
[14] J. Guo, H. Zhu, Y. Sun, L. Tang, X. Zhang, Flexible foams of graphene entrapped SnO2-Co3O4 nanocubes with remarkably large and fast lithium storage. J. Mater. Chem. A 4, 16101-16107 (2016). doi:10.1039/C6TA06626G
[15] T. Jiang, X. Tian, H. Gu, H. Zhu, Y. Zhou, Zn2SnO4@C core–shell nanorods with enhanced anodic performance for lithium-ion batteries. J. Alloys Compd. 639, 239-243 (2015). doi:10.1016/j.jallcom.2015.03.172
[16] C. Yuan, L. Zhang, L. Hou, L. Zhou, G. Pang, L. Lian, Scalable room-temperature synthesis of mesoporous nanocrystalline ZnMn2O4 with enhanced lithium storage properties for lithium-ion batteries. Chem. Eur. J. 21(3), 1262-1268 (2015). doi:10.1002/chem.201404624
[17] D. Cai, D. Wang, H. Huang, X. Duan, B. Liu, L. Wang, Y. Liu, Q. Li, T. Wang, Rational synthesis of ZnMn2O4 porous spheres and graphene nanocomposite with enhanced performance for lithium-ion batteries. J. Mater. Chem. A 3(21), 11430-11436 (2015). doi:10.1039/C5TA00539F
[18] Y. Sun, X. Hu, W. Luo, F. Xia, Y. Huang, Reconstruction of conformal nanoscale MnO on graphene as a high-capacity and long-life anode material for lithium ion batteries. Adv. Funct. Mater. 23(19), 2436-2444 (2013). doi:10.1002/adfm.201202623
[19] H. Xia, D. Zhu, Y. Fu, X. Wang, CoFe2O4-graphene nanocomposite as a high-capacity anode material for lithium-ion batteries. Electrochimi. Acta 3, 166-174 (2012). doi:10.1016/j.electacta.2012.08.027
[20] Y.S. Yang, C.Y. Wang, M.M. Chen, Z.Q. Shi, J.M. Zheng, Facile synthesis of mesophase pitch/exfoliated graphite nanoplatelets nanocomposite and its application as anode materials for lithium-ion batteries. J. Solid State Chem. 183(9), 2116-2120 (2010). doi:10.1016/j.jssc.2010.07.011
[21] C. Ma, C. Ma, J. Wang, H. Wang, J. Shi, Y. Song, Q. Guo, L. Liu, Exfoliated graphite as a flexible and conductive support for Si-based Li-ion battery anodes. Carbon 72, 38-46 (2014). doi:10.1016/j.carbon.2014.01.027
[22] Y.X. Wang, L. Huang, L.C. Sun, S.Y. Xie, G.L. Xu et al., Facile synthesis of a interleaved expanded graphite-embedded sulphur nanocomposite as cathode of Li–S batteries with excellent lithium storage performance. J. Mater. Chem. 22(11), 4744-4750 (2012). doi:10.1039/c2jm15041g
[23] Y. Zhao, C. Ma, Y. Li, H. Chen, Z. Shao, Self-adhesive Co3O4/expanded graphite paper as high-performance flexible anode for Li-ion batteries. Carbon 95, 494-496 (2015). doi:10.1016/j.carbon.2015.08.053
[24] D. Zhao, L. Wang, P. Yu, L. Zhao, C. Tian, W. Zhou, L. Zhang, H. Fu, From graphite to porous graphene-like nanosheets for high rate lithium-ion batteries. Nano Res. 8(9), 2998-3010 (2015). doi:10.1007/s12274-015-0805-z
[25] Y. Zhao, C. Ma, C. Ma, J. Shi, J. shi, Facile solution-free preparation of a carbon coated Fe3O4 nanoparticles/expanded graphite composite with outstanding Li-storage performances. Mater. Lett. 177, 148-151 (2016). doi:10.1016/j.matlet.2016.04.049
[26] Y. Xiao, J. Zai, X. Li, Y. Gong, B. Li, Q. Han, X. Qian, Polydopamine functionalized graphene/NiFe2O4 nanocomposite with improving Li storage performances. Nano Energy 6, 51-58 (2014). doi:10.1016/j.nanoen.2014.03.006
[27] J. Zhu, T. Zhu, X. Zhou, Y. Zhang, X.W. Lou, X. Chen, H. Zhang, H.H. Hng, Q. Yan, Facile synthesis of metal oxide/reduced graphene oxide hybrids with high lithium storage capacity and stable cyclability. Nanoscale 3(3), 1084-1089 (2011). doi:10.1039/C0NR00744G
[28] G. Zhou, J. Ma, L. Chen, Selective carbon coating techniques for improving electrochemical properties of NiO nanosheets. Electrochim. Acta 133, 93-99 (2014). doi:10.1016/j.electacta.2014.03.161
[29] Y. Zhao, Z. Feng, Z. J. Xu, Yolk-shell Fe2O3 odot C composites anchored on MWNTs with enhanced lithium and sodium storage. Nanoscale 7(21), 9520-9525 (2015). doi:10.1039/C5NR01281C
[30] Z. Li, H. Wang, Z. Sun, J. Su, Z. Wang, L. Wang, Self-activated continuous pulverization film: an insight into the mechanism of the extraordinary long-life cyclability of hexagonal H4.5Mo5.25O18·(H2O)1.36 microrods. J. Mater. Chem. A 4(1), 303-313 (2016). doi:10.1039/C5TA07314F
[31] Y. Xiao, X. Li, J. Zai, K. Wang, Y. Gong, B. Li, Q. Han, X. Qian, CoFe2O4-Graphene Nanocomposites Synthesized through An Ultrasonic Method with Enhanced Performances as Anode Materials for Li-ion Batteries. Nano-Micro Lett. 6(4), 307-315 (2014). doi:10.1007/s40820-014-0003-7
[32] S. Yang, H. Song, X. Chen, Electrochemical performance of expanded mesocarbon microbeads as anode material for lithium-ion batteries. Electrochem. commun. 8(1), 137-142 (2006). doi:10.1016/j.elecom.2005.10.035
[33] Y. Fu, Y. Wan, H. Xia, X. Wang, Nickel ferrite–graphene heteroarchitectures: Toward high-performance anode materials for lithium-ion batteries. J. Power Sources 213, 338-342 (2012). doi:10.1016/j.jpowsour.2012.04.039
[34] B. Tian, J. Swiatowska, V. Maurice, S. Zanna, A. Seyeux, L.H. Klein, P. Marcus, Aging-induced chemical and morphological modifications of thin film iron oxide electrodes for lithium-ion batteries. Langmuir 30(12), 3538-3547 (2014). doi:10.1021/la404525v
[35] G. Wang, X. Shen, J. Yao, J. Park, Graphene nanosheets for enhanced lithium storage in lithium ion batteries. Carbon 47, 2049-2053 (2009). doi:10.1016/j.carbon.2009.03.053
[36] Y. Wu, Y. Wei, J. Wang, K. Jiang, S. Fan, Conformal Fe3O4 sheath on aligned carbon nanotube scaffolds as high-performance anodes for lithium ion batteries. Nano lett. 13(2), 818-823 (2013). doi:10.1021/nl3046409
[37] G. Zhou, D.W. Wang, F. Li, L. Zhang, N. Li, Z. S. Wu, L. Wen, G.Q. Lu, H.M. Cheng, Graphene-wrapped Fe3O4 anode material with improved reversible capacity and cyclic stability for lithium ion batteries. Chem. Mater. 22(18), 5306-5313 (2010). doi:10.1021/cm101532x
[38] P. Zhu, S. Liu, J. Xie, S. Zhang, G. Cao, X. Zhao, Facile synthesis of NiFe2O4/reduced graphene oxide hybrid with enhanced electrochemical lithium storage performance. J. Mater. Sci. Technol. 30(11), 1078-1083 (2014). doi:10.1016/j.jmst.2014.08.009
[39] L. Wu, Q. Xiao, Z. Li, G. Lei, P. Zhang, L. Wang, CoFe2O4/C composite fibers as anode materials for lithium-ion batteries with stable and high electrochemical performance. Solid State Ionics 215, 24-28 (2012). doi:10.1016/j.ssi.2012.03.044
[40] L. Tao, J. Zai, K. Wang, Y. Wan, H. Zhang, C. Yu, Y. Xiao, X. Qian, 3D-hierarchical NiO-graphene nanosheet composites as anodes for lithium ion batteries with improved reversible capacity and cycle stability. RSC Adv. 2(8), 3410-3415 (2012). doi:10.1039/c2ra00963c
[41] S. Laruelle, S. Grugeon, P. Poizot, M. Dolle, L. Dupont, J. Tarascon, on the origin of the extra electrochemical capacity displayed by MO/Li cells at low potential. J. Electrochem. Soc. 149(5), A627-A634 (2002). doi:10.1149/1.1467947
[42] P.Preetham, S. Mohapatra, S. Nair, D. Santhanagopalan, A.K. Rai, Ultrafast pyro-synthesis of NiFe2O4 nanoparticles within a full carbon network as a high-rate and cycle-stable anode material for lithium ion. RCS Adv. 6(44), 38064-38070 (2016). doi:10.1039/c6ra03670h
[43] J. Wang, G. Yang, L. Wang, W. Yan, Synthesis of one-dimensional NiFe2O4 nanostructures: tunable morphology and high-performance anode materials for Li ion batteries. J. Mater. Chem. A 4(22), 8620-8629 (2016). doi:10.1039/C6TA02655A
[44] T. Wei, F. Wang, J. Yan, J. Cheng, Z. Fan, H. Song, Microspheres composed of multilayer graphene as anode material for lithium-ion batteries. J. Electroanaly. Chem. 653(1-2), 45-49 (2011). doi:10.1016/j.jelechem.2011.01.010
[45] C.M. Chen, J.Q. Huang, Q. Zhang, W.Z. Gong, Q.H. Yang, M. Wang, Y. Yang, Annealing a graphene oxide film to produce a free standing high conductive graphene film. Cabon 50(2), 659-667 (2012). doi:10.1016/j.carbon.2011.09.022
[46] L. Bai, D. Zhao, T. Zhang, W. Xie, J. Zhang, A comparative study of electrochemical performance of graphene sheets, expanded graphite and natural graphite as anode materials for lithium-ion batteries. Electrochim. Acta 107, 555-561 (2013). doi:10.1016/j.electacta.2013.06.032

Citation Information

Yinglin Xiao, Jiantao Zai, Bingbing Tian and Xuefeng Qian, Formation of NiFe2O4/Expanded Graphite Nanocomposites with Superior Lithium Storage Properties. Nano-Micro Lett.(2017) 9: 34. http://dx.doi.org/10.1007/s40820-017-0127-7

History

Received: 9 November 2016 / Accepted: 26 December 2016


Additional Info

  • Type of Publishing: JOUR - Journal
  • Title: Formation of NiFe2O4/Expanded Graphite Nanocomposites with Superior Lithium Storage Properties
  • Author: Yinglin Xiao, Jiantao Zai, Bingbing Tian, Xuefeng Qian
  • Year: 2017
  • Volume: 9
  • Issue: 3
  • Journal Name: Nano-Micro Letters
  • ISSN: 2150-5551
  • URL: http://dx.doi.org/10.1007/s40820-017-0127-7
  • Abstract: A NiFe2O4/expanded graphite (NiFe2O4/EG) nanocomposite was prepared via a simple and inexpensive synthesis method. Its lithium storage properties were studied with the goal of applying it as an anode in a lithium-ion battery. The obtained nanocomposite exhibited a good cycle performance, with a capacity of 601 mAh g-1 at a current of 1 A g-1 after 800 cycles. This good performance may be attributed to the enhanced electrical conductivity and layered structure of the EG. Its high mechanical strength could postpone the disintegration of the nanocomposite structure, efficiently accommodate volume changes in the NiFe2O4-based anodes, and alleviate aggregation of NiFe2O4 nanoparticles.
  • Publish Date: Monday, 09 January 2017
  • Start Page: 34
  • DOI: 10.1007/s40820-017-0127-7